Pioneer DEH-P9300 operation manual TV Tuner, QBand WPreset number eChannel

TV Tuner

The following explains how to use this product to control a TV tuner, which is sold separately. For details of TV tuner-specific operation/fea- tures, see your TV tuner’s manual.

•With this product, you can operate preset chan- nel list as one additional function.

Display and indicators

FORM 1

qw

e

FORM 2

qw

e

qBand

wPreset number eChannel

29

Basic operation

1.Press SOURCE to select the TV tuner. Press SOURCE until “Television” appears.

2.Press VOLUME to extend the VOLUME outward.

•When you press VOLUME, it extends for- ward so that it becomes easier to turn. To retract VOLUME, press it again.

3.Turn VOLUME to adjust the volume.

4.Press 2 or 3 to tune in to a station.

•If you press and hold 2 or 3 for about one second and then release, you can perform seek tuning.

Storing and recalling broadcast stations

If you press any of the buttons 1 – 6 (or 7 – 12), you can easily store up to 12 broadcast stations for later recall.

Storing broadcast stations

1.Press NEXT to display “1” – “6” (or “7” – “12”).

Press NEXT until “1” – “6” (or “7” – “12”) appears.

2.When you find a station that you want to store in memory, press and hold any of the buttons 1 – 6 (or 7 – 12) until the pre- set number stops flashing.

The station is stored in memory under the selected button.

Note:

•Up to 12 stations can be memorized in one band.

•This product allows you to store and recall directly using preset channels 7 –12.