Setting
speaker level
You can set the balance and level of speakers.
√ 
1 Press SETUP/MENU button, and then press ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
2 Press 
button to select the “LEVEL SETUP”, and then press ENTER button.
3 Press 
button to select the speaker you want.
• Each time you press 
button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL ➝ S.L ➝ S.W will be selected in turn.
4 Press …† button to set the speaker mode.
• You can adjust it from
•The sound gets quieter at
To exit setup mode
•Wait for about 5 seconds or press SETUP/MENU button. “SETUP OFF” appears on the display and Setup Mode is exited.
Using the SPK LEVEL button
1 Press SPK LEVEL button to select the speaker you want.
•Each time you press this button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL ➝ S.L
➝ S.W ➝ SPK LVL OFF will be selected in turn.
2 Press …† button to set the speaker level you want.
• You can adjust it from
• The sound gets quieter at
Setting Speaker Level
•F.L (front left) :
•CEN (centre) :
•F.R (front right) :
•S.R (surround right) :
•SBR (surround back right) :
•SBL (surround back left) :
•S.L (surround left) :
•S.W (subwoofer) :
Dolby
Pro Logic llx mode
This mode provides 7.1 channel sound from 2 channel sources.
REMOTE CONTROL
Press 
MODE button.
•Each time you press this button, CINEMA ➝ MATRIX ➝ GAME ➝ PL ➝ MUSIC will be selected in turn.
MAIN UNIT
1 Press SURROUND button to select “DPLIIx MODE”.
• Each time you press this button, DPLIIx ➝ NEO:6 ➝ SFE ➝ STEREO will be selected in turn.
2 Press SELECT( 
, 
) button.
• Each time you press SELECT ( 
) button, CINEMA ➝ MATRIX ➝ GAME ➝ PL ➝ MUSIC will be selected in turn.
•Each time you press SELECT ( 
) button, MUSIC ➝ PL ➝ GAME ➝
MATRIX ➝ CINEMA will be selected in turn.
To exit setup mode
• Wait for about 5 seconds.
Dolby Pro Logic llx mode
•MUSIC : Provides 7.1 channel surround sound for digital, analog or existing stereo sources such as CD, TAPE, FM, TV and stereo VCR.
•CINEMA : Adds realism to the movie soundtrack.
• MATRIX : You will hear 7.1 channel surround sound.
•GAME : Enhances the excitement of the game's sound.
• PL : You will experience a surround effect with just the front left and right speakers.
•You cannot use Dolby Pro Logic llx mode for multi channel signals such as Dolby Digital and DTS.
•Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
•Sound will not be output from the surround back speaker if the PCM audio signal is mono.
GB
OPERATION
28 | 29 |