SMC Networks SMC9452TX-1 manual Windows

Page 18

Windows 2000

Step 1: After you have inserted the SMC9452TX-1 PCI Card in your machine and turned it back on, the Operating System will automatically recognize the adapter and prompt you for the appropriate drivers. Click the [Next >] button to begin the installation.

Step 2: Insert the Driver CD and select the [Search for a suitable driver...] option. Then click [Next >].

Step 3: Clear all checkboxes except for [Specify a location]. Then click [Next >].

Step 4: You will then be prompted to enter the location of the drivers. This should

be ?:\SMC9452\WIN2000. (Note: The ? equals the letter of your CD-ROM drive. In most cases, this is D.) Then click [OK]. You can also click [Browse] and browse to the location of the drivers on the CD for further verification.

Step 5: The system should find the drivers. Click the [Next >] button to continue the installation.

(Note: If the system could not find the drivers, click the [< Back] button, and select the [Display a list of the known drivers...] option. Select [Network Adapters] from the list of devices, press [Have Disk] and once again browse to the location of the drivers)

Step 6: You have now completed the driver installation. Click [Finish] to initialize the adapter.

17

Image 18
Contents Page Copyrights Contents Limited Warranty Limited Warranty FCC Class a EC Conformance Declaration Class BIndustry Canada Class B Japan Vcci Class B Australia AS/NZS 3548 1995 Class BPackage Contents Hardware DescriptionSystem Requirements PCI Configuration Connecting Category 5 CableConnecting UTP Cable Windows 95/98 Page Page Page Windows Me Page Windows NT Windows Windows XP Page Page Page Page Page Windows 95/98/Me Windows Page Troubleshooting PCI CompatibilitySolutions for Common Problems Network Card Installation ProblemsNetwork Connection Problems Cable Specifications Twisted-Pair Cable and Pin Assignments1000BASE-T Pin Assignments Technical Specifications Temperature Terminology Page Page Tesla Irvine, CA Phone 949