SMC Networks manual To power the SMC2582W-B by SMCPWR-INJ3 Power Injector, To power outlet

2. First-Time Installation and Configuration

2.1. Selecting a Power Supply Method

The SMC2582W-B can be powered by either the supplied power adapter or the optional SMCPWR- INJ3 EliteConnect™ Power Injector.The SMC2582W-B automatically selects the suitable power depending on your decision.

To power the SMC2582W-B by the supplied power adapter:

1.Plug the power adapter to an AC socket.

2.Plug the connector of the power adapter to the power jack of the SMC2582W-B.

NOTE: This product is intended to be power-supplied by a Listed Power Unit, marked “Class 2” or “LPS” and output rated “5V DC, 1 A minimum” or equivalent statement.

To power the SMC2582W-B by SMCPWR-INJ3 Power Injector:

1. Connect the power cord cable from power outlet to the SMCPWR-INJ3 power connector.

To power outlet

Fig. 1. Connecting the power cord cable to SMCPWR-INJ3.

2.Check the “POWER” LED: if system is normal, the LED will be on (Green light); otherwise, the “POWER” LED will be off.

3.Connect the Ethernet cable (RJ-45 Category 5) from Ethernet Hub/Switch to the “DATA IN” port of SMCPWR-INJ3 Power Injector.

4.Connect another Ethernet cable (RJ-45 Category 5) from “POWER & DATA OUT” port of the SMCP WR-INJ3 Power Injector to the SMC2582W-B Wireless Bridge.

10