SMC Networks SMC2582W-B manual Management

Page 8

•Management

•Web-based management for configuring and monitoring SMC2582W-B via a Web-Browser.

•SNMP. SNMP (Simple Network Management Protocol) MIB I, MIB II, IEEE 802.1d, and Private Enterprise MIB are supported.

•UPnP. The SMC2582W-B responds to UPnP discovery messages so that a Windows XP user can locate the SMC2582W-B in My Network Places and use a Web browser to configure it.

•Telnet. The SMC2582W-B can be managed by Telnet.

•System log. For system operational status monitoring.

•Local log. System events are logged to the on-board RAM of the SMC2582W-B and can be viewed using a Web browser.

•Remote log by SNMP trap. Systems events are sent in the form of SNMP traps to a remote SNMP management server.

•Remote log by BSD Syslog. Systems events are sent in the form of BSD Syslog (RFC3164) to a remote Syslog server.

•Power over Ethernet (optional). Supplying power to an SMC2582W-B over an Ethernet cable using SMCPWR-INJ3 Power Injector (IEEE 802.3af compliant).This feature facilitates large-scale wireless LAN deployment.

•Hardware Watchdog Timer. If the firmware gets stuck in an invalid state, the hardware watch- dog timer will detect this situation and restart the SMC2582W-B.This way, the SMC2582W-B can provide continuous services.

8

Image 8

Contents C 2 5 8 2 W B Tesla CopyrightTrademarks Industry Canada Class B Federal Communication Commission Interference StatementFCC Radiation Exposure Statement Edificio Conata EC Conformance Declaration Class BWichtige Sicherheitshinweise Germany Page Overview Features Ieee 802.11b Operational modesIntroduction Page Management LED Definitions To power the SMC2582W-B by SMCPWR-INJ3 Power Injector To power outletMounting the SMC2582W-B on a Wall Hang the SMC2582W-B on the screwsPreparing for Configuration Mounting the SMC2582W-B on a wallChanging the TCP/IP Settings of the Managing Computer Configuring the SMC2582W-B Entering the User Name and PasswordSelecting an Operational Mode StartLowing table Operational modes vs. wireless link types Configuring TCP/IP Settings Configuring Ieee 802.11 SettingsWireless Distribution System settings To enable a WDS link Select the corresponding Enabled check boxReviewing and Applying Settings Settings changes are highlighted in redDeploying the SMC2582W-B Fix the alignment of the antenna on one sideMenu Structure Using Web-Based ManagementOverview Management. UPnP, System Log, and Snmp settings Save, Save & Restart, and Cancel CommandsAdvanced. Advanced settings of the SMC2582W-B Home and Refresh Commands Viewing Status Associated Wireless ClientsCurrent Dhcp Mappings System LogGeneral Operations Selecting an Operational Mode Changing Password Managing FirmwareConfiguration restore by Http Upgrading Firmware by HttpTo restore configuration of the SMC2582W-B by Http Trigger the firmware upgrade process by clicking UpgradeUpgrading Firmware by Tftp Choose Tftp as the Firmware management protocolBacking up and Restoring Configuration Settings by Tftp Choose Tftp as the Firmware management protocol Resetting Configuration to Factory Defaults Configuring TCP/IP Related Settings AddressingDhcp Server Basic Static Dhcp MappingsBasic Ieee 802.11b communication settings Wireless Distribution System Link IntegrityWireless Distribution System settings To enable a WDS link Security Network topology containing a loopPage MAC-Address-Based Access Control MAC-address-based access control settingsMAC ACL download settings Click DownloadIP Protocol Filters Configuring Advanced Settings Packet FiltersEthernet Type Filters UPnP TCP/UDP Port FiltersManagement Basic System log settings SnmpPage Appendix a Default Settings Appendix B Troubleshooting Wireless Settings ProblemsTCP/IP Settings Problems Check the following firstPage Other Problems SMC2582W-B Configuration UtilityDistances and Data Rates Contact our technical support representatives for repairPage Weight 80 lbs Configuration and Management Web-browser TelnetSyslog Event Logging LEDs Power SMCPWR-INJ3 Power Injector Storage TemperaturePin Assignments and Polarity + 4/5 7/8 Output Voltage Storage HumidityFor Technical SUPPORT, Call

Related manuals

Manual 2 pages 61.05 Kb