4.When you have completed configuring these settings, click the [APPLY] button to save the settings and reboot the Wireless Bridge.
5.To configure wireless settings, click on the [Wireless] link on the left hand navigation menu, and then choose the [Configuration] option.
From this section, you can configure:
•AP Name
•SSID
•Transmission Rate
•Basic Rate
•Channel
•Preamble
•Beacon Interval
•RTS Threshold
•Fragmentation Threshold
•DTIM Interval
•Authentication Type
•Antenna
•SSID Broadcast
Note: Definitions of these settings can be found in the Glossary section at the end of this User Guide.
6.When you have completed configuring these settings, click the [APPLY] button to save the settings and reboot the Bridge.
28