SMC Networks SMC2482W manual

3.Hold down the [Reset] button which is located on the back of the device. You may need to use a pin or other pointed object to hold the button down.

4.Plug the power connector into the Wireless Bridge while holding down the [Reset] button.

5.The “TX/RX” LED will be solid, then flash 5-6 times.

6.Then the “LINK/ACT” LED will blink quickly several times.

7.Release the [Reset] button.

8.Unplug the power from the Wireless Bridge for 2 seconds, and then plug the power back in.

9.The Wireless Bridge will reboot and the LEDs will return to the normal status.

Using the Web-based Utility

1.Log into the SMC2482W Web-based Utility. (See section 4.2 for more information)

2.Click on [Tools] link on the left hand navigation menu, and then click the [Reset] option.

11