SMC Networks SMC2482W manual Getting Started

Section 1 Getting Started

Site Location

Choose a location for your EZ Connect Turbo Wireless Bridge. In Bridge mode, the best location for the SMC2482W is at the edge of your wireless coverage area. In Access Point mode, the best location is at the center of your wireless network.

Connect the Ethernet cable

The EZ Connect Turbo Wireless Bridge should be connected to a network switch or hub that is connected to a DHCP server, or connected to a Barricade Broadband Router. Use a standard Category 5 UTP Ethernet cable with an RJ-45 connector to con- nect the Bridge to one of router, hub, or switch.

Connect the power cable

Connect the power adapter cable to the 5V DC power socket on the rear panel.

Warning: Use only the power adapter supplied with the SMC2482W. Using another power adapter will cause damage to the unit and void the warranty.

Antennas

LED Indicator lights:

• Power

• Wireless Transmit/Receiver

• Ethernet Link/Activity

9