SMC Networks SMC7004AWBR manual Safety Compliance, Underwriters Laboratories Compliance Statement

Page 9

LIMITED WARRANTY

Safety Compliance

Underwriters Laboratories Compliance Statement

Important! Before making connections, make sure you have the correct cord set.

Check it (read the label on the cable) against the following:

Operating Voltage

Cord Set Specifications

 

 

120 Volts

UL Listed/CSA Certified Cord Set

 

 

 

Minimum 18 AWG

 

 

 

Type SVT or SJT three conductor cord

 

 

 

Maximum length of 15 feet

 

 

 

Parallel blade, grounding type attachment plug

 

rated 15A, 125V

 

 

240 Volts (Europe only)

Cord Set with H05VV-F cord having three

 

conductors with minimum diameter of 0.75 mm2

 

IEC-320 receptacle

 

 

 

Male plug rated 10A, 250V

 

 

The unit automatically matches the connected input voltage. Therefore, no additional adjustments are necessary when connecting it to any input voltage within the range marked on the rear panel.

Wichtige Sicherheitshinweise (Germany)

1.Bitte lesen Sie diese Hinweise sorgfältig durch.

2.Heben Sie diese Anleitung für den späteren Gebrauch auf.

3.Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie keine Flüssigoder Aerosolreiniger. Am besten eignet sich ein angefeuchtetes Tuch zur Reinigung.

4.Die Netzanschlu ßsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein.

5.Das Gerät ist vor Feuchtigkeit zu schützen.

6.Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein Kippen oder Fallen könnte Beschädigungen hervorrufen.

7.Die Belüftungsöffnungen dienen der Luftzirkulation, die das Gerät vor Überhit- zung schützt. Sorgen Sie dafür, daß diese Öffnungen nicht abgedeckt werden.

8.Beachten Sie beim Anschluß an das Stromnetz die Anschlußwerte.

9.Verlegen Sie die Netzanschlußleitung so, daß niemand darüber fallen kann. Es sollte auch nichts auf der Leitung abgestellt werden.

10.Alle Hinweise und Warnungen, die sich am Gerät befinden, sind zu beachten.

Image 9
Contents Barricade Wireless Broadband Router Page Barricade Wireless Broadband Router User Guide Trademarks CopyrightLimited Warranty Limited Warranty EC Conformance Declaration Class B FCC Class BJapan Vcci Class B Australia AS/NZS 3548 1995 Class B Industry Canada Class BSafety Compliance Underwriters Laboratories Compliance StatementWichtige Sicherheitshinweise Germany Compliances Table of Contents Configuring Printer Services Configuring Client TCP/IPAppendices Xiv Chapter Introduction About the Wireless BarricadeFeatures and Benefits Internet Access Flexible LAN AccessApplications Shared IP AddressUser-Definable Application Sensing Tunnel Virtual ServerDMZ Host Support SecurityVirtual Private Network Applications Package Contents Chapter InstallationDescription of Hardware Installation Front and Rear Panels System Requirements Connect the System Basic Installation ProcedureInternet Reset Printer COM WAN Making Wlan Connections Attach the Wireless Barricade to the Internet Verify Port Status Connecting the Power AdapterInstallation TCP/IP Configuration Configuring Client PCSPrinter Client Installation Configuring the Barricade Setting a Password Making Configuration ChangesNavigating the Web Browser Interface Menu Description Main MenuInternet Networking and Client Services Change Password Set Time Zone LAN Gateway and Dhcp SettingsWAN Configuration Static IP Address Fixed IP Dynamic IP Address DhcpPPP over Ethernet PPPoE Dial-up on Demand Modem Has your Internet Service Provider given you an IP address?DNS Configuration Channel and Ssid Wireless ConfigurationEncryption Configuring the Barricade Firewall Protection Configuring Client ServicesVirtual Server Enabling Special Applications Client Filtering MAC Filtering Configuring the Barricade Cannot Miscellaneous Settings Misc Networking and Client Services Field Description Viewing Network and Device StatusUsing System Tools Installing TCP/IP Protocol in Your PC Configuring Client TCP/IPInstalling TCP/IP Protocol in Your PC Setting TCP/IP to Work with the Barricade Dynamic IP Allocation via a Dhcp Server Manual IP Configuration Verifying Your TCP/IP Connection Configuring Client TCP/IP Setting TCP/IP to Work with the Barricade Install the Printer Port Monitor Configuring Printer ServicesInstall the Printer Port Monitor Configuring Printer Services Configure the Network Printer in Windows 95/98/ME Configure the Print ServerConfiguring Printer Services Configure the Network Printer in Windows NT Configuring Printer Services Configure the Network Printer in Unix Systems Appendix a Troubleshooting TCP/IP Troubleshooting Chart Troubleshooting Specifications Ethernet CableTwisted-pair Cable Crossover Cable RJ-45 Port Pin Assignments Pin MDI Signal Name MDI-X Signal NameDB-9 Port Pin Assignments Serial Port Pin AssignmentsSerial Port to 9-Pin COM Port on PC Serial Port to 25-Pin DCE Port on ModemSerial Port to 25-Pin DTE Port on PC DB-25 Printer Port Pin Assignments Printer Port Pin AssignmentsLAN Interface WAN InterfaceWlan Interface Printer InterfaceIndicator Panel Advanced FeaturesDimensions WeightWarranty TemperatureHumidity CompliancesSpecifications Appendix D Ordering Information Ordering Information Page Internet