CONFIGURING THE BARRICADE
Dynamic IP Address – DHCP
The Host Name is optional, but may be required by some ISPs. The default MAC address is set to the WAN’s physical interface on the Wireless Barricade. Use this address when registering for Internet service, and do not change it unless required by your ISP. You can use the “Clone MAC Address” button to copy the MAC address of the Ethernet Card installed by your ISP (in your PC) and replace the WAN MAC address with this MAC address.
Static IP Address – Fixed IP
If your Internet Service Provider has assigned a fixed address, enter the assigned address and subnet mask for the Wireless Barricade, then enter the gateway address of your ISP.