SMC Networks SMCWBR14S-N4 manual Mounting on a Wall, Wall Mounting

CHAPTER 3 Installing the Gateway Router

Mounting on a Wall

MOUNTING ON A WALL

The Wireless Broadband Router should be mounted only to a wall or wood surface that is at least 1/2-inch plywood or its equivalent. To mount the unit on a wall, always use its wall-mounting bracket. The unit must be mounted with the RJ-45 cable connector oriented upwards to ensure proper operation.

Figure 8: Wall Mounting

Mounting Slots

To mount on a wall, follow the instructions below.

1.Mark the position of the two screw holes on the wall. For concrete or brick walls, you will need to drill holes and insert wall plugs for the screws.

2.Insert the included screws into the holes, leaving about 0.08~0.12 inches (2-3 mm) clearance from the wall.

3.Line up the two mounting points on the unit with the screws in the wall, then slide the unit down onto the screws until it is in a secured position.

– 34 –