SMC Networks SMCWBR14S-N4 manual Internet Settings

CHAPTER 6 Internet Settings

WAN Setting

◆Password — Sets a PPTP password for the WAN port. (Default: pptp_password; Range: 1~32 characters)

◆Verify Password — Prompts you to re-enter your chosen password.

◆Address Mode — Sets a PPTP network mode. (Default: Static)

◆IP Address — Sets the static IP address. (Default: 0.0.0.0, available when PPTP Network Mode is set to static IP.)

◆Subnet Mask — Sets the static IP subnet mask. (Default: 255.255.255.0, available when PPTP Network Mode is set to static IP.)

◆Default Gateway — The IP address of the gateway router for the Wireless Broadband Router, which is used if the requested destination address is not on the local subnet.

◆Operation Mode — Selects the operation mode as Keep Alive, or Manual. (Default: Keep Alive)

■Keep Alive Mode: The Wireless Broadband Router will periodically check your Internet connection and automatically re-establish your connection when disconnected. (Default: 60 seconds)

■Manual Mode: The unit will remain connected to the Internet without disconnecting.

◆Primary DNS Server — The IP address of the Primary Domain Name Server. A DNS maps numerical IP addresses to domain names and can be used to identify network hosts by familiar names instead of the IP addresses. To specify a DNS server, type the IP addresses in the text field provided. Otherwise, leave the text field blank.

◆Secondary DNS Server — The IP address of the Secondary Domain Name Server.

◆MAC Clone — Some ISPs limit Internet connections to a specified MAC address of one PC. This setting allows you to manually change the MAC address of the Wireless Broadband Router's WAN interface to match the PC's MAC address provided to your ISP for registration. You can enter the registered MAC address manually by typing it in the boxes provided. Otherwise, connect only the PC with the registered MAC address to the Wireless Broadband Router, then click the “Clone your PC’s MAC Address” (Default: Disable)

– 60 –