Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Scan Tab

Scan Tab

On the Scan tab, you can specify the following settings.

Status of ScanGear dialog after scanning

Select what to do with ScanGear (scanner driver) after scanning images. Close ScanGear automatically is selected by default.

Close ScanGear automatically

Select this to return to the original application when scanning is completed.

Do not close ScanGear automatically

Select this to return to the ScanGear (scanner driver) screen for another scan when scanning is

completed.

Display the dialog to select next action

Select this to open a screen and select what to do when scanning is completed.

Note

Even if Do not close ScanGear automatically or Display the dialog to select next action is set,

some applications may not support it.

Page top

Page 661
Image 661
Canon MP550 manual On the Scan tab, you can specify the following settings, Status of ScanGear dialog after scanning