Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings Using ScanGear (Scanner Driver) > Scanning in Advanced Mode

Scanning in Advanced Mode

In Advanced Mode, you can specify the color mode, output resolution, image brightness, color tone, etc.

when scanning.

This section explains how to scan a single document.

See "Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) " to scan multiple documents at one time.

Important

The following types of documents may not be cropped correctly. In that case, click (Thumbnail) on the Toolbar to switch to whole image view and scan.

-Photos that have a whitish border

-Documents printed on white paper, hand-written text, business cards, etc.

-Thin documents

-Thick documents

The following types of documents cannot be cropped correctly.

-Documents smaller than 1.18 inches (3 cm) square

-Photos that have been cut to various shapes

1.Place the document on the Platen, then start ScanGear (scanner driver).

Starting ScanGear (Scanner Driver)

Important

Place the document face-down on the Platen and align an upper corner of the document with the corner at the arrow (alignment mark) of the Platen.

2.Click Advanced Mode.

The Advanced Mode tab appears.

Note

Page 602
Image 602
Canon MP550 manual Scanning in Advanced Mode, Click Advanced Mode, Advanced Mode tab appears