Auto Correction

3.Make sure that Auto is selected.

4.Click Red-Eye Correction.

5.Click OK.

Red eyes are corrected and the (Correction/Enhancement) mark appears on the upper left of the image.

Important

Areas other than the eyes may be corrected depending on the image.

Note

Click (Compare) to display the images before and after the correction side by side so that you can compare and check the result.

Click Reset Selected Image to undo the correction operation.

If you want to apply the correction to all the selected images at once, select the Apply to all

images checkbox.

Manual Correction

3.Click Manual, then click Correct/Enhance.

4.Click Red-Eye Correction.

Note

Effect levels can be changed using the slider below Red-Eye Correction.

Move the cursor over the image. The shape of the cursor changes to (Paintbrush).

5.Drag to select the red area you want to correct, then click OK that appears over the image.

Page 197
Image 197
Canon MP550 Click Red-Eye Correction Click OK, Make sure that Auto is selected, Click Manual, then click Correct/Enhance