Canon MP550 manual Input Settings allows you to set the following items, Select Source

Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Input Settings

Input Settings

Input Settings allows you to set the following items:

Select Source

The type of document to be scanned is displayed.

Paper Size

Select the size of the document to be scanned. This setting is available in whole film image view only. When you select a size, the Preview area size changes accordingly.

Important

Some applications have a limit to the amount of scan data they can receive. ScanGear (scanner driver) can scan data that is of:

- 21000 pixels x 30000 pixels or less

If you change Paper Size after previewing, the preview image will be deleted.

Note

If you are not sure which size you should select for Paper Size, set Paper Size to Full Platen, then

measure the size of the document and enter the values into (Width) and (Height).

Color Mode

Select how to scan the document.

Color

Select this mode to scan color documents or to create color images. This mode renders the image in 256 levels (8 bit) of R(ed), G(reen), and B(lue).

Grayscale

Select this mode to scan black and white photos, or to create black and white images. This mode