Canon MP550 manual Set Output Settings, Set Color Mode, Input Settings, Advanced Mode Tab

Settings are not retained when you switch between modes.

3.Set Color Mode.

Input Settings

4.Click Preview.

Preview image appears in the Preview area.

Note

If you scan without preview, the show-through reduction function will be active. This function is

useful when scanning magazines. However, when scanning photos, the color tone of the

scanned image may differ from the source due to the show-through reduction function. In that case, use preview first.

5.Set Output Settings.

Output Settings

6.Adjust the cropping frame (scan area), correct image and adjust colors as required.

Adjusting Cropping Frames

Image Settings

Color Adjustment Buttons

7.Click Scan.

Scanning starts.

Note

Click (Information) to open a dialog box in which you can check the current scan settings (document type, etc.).

ScanGear's response after scanning can be specified in Status of ScanGear dialog after scanning

on the Scan tab of the Preferences dialog box. Scan Tab

Related Topic

Advanced Mode Tab