6
INTERNET SETTINGS
The Internet Settings pages allow you to manage basic system configuration settings. It includes the following sections:
◆“WAN Setting” on page 55
■“DHCP” on page 55
■“Static IP” on page 57
■“PPPoE” on page 58
■“PPTP” on page 59
◆“LAN Setting” on page 61
◆“Advanced Routing” on page 63
NOTE: In Bridge mode, the Wireless Broadband Router’s Internet Settings options are significantly reduced, with only LAN Settings and the Client List being available to the user.
WAN SETTING
The WAN Setting page specifies the Internet connection parameters. Click on “Internet Settings” followed by “WAN”.
◆WAN Connection Type — By default, the access point WAN port is configured with DHCP enabled. After you have network access to the access point, you can use the web browser interface to modify the initial IP configuration, if needed. The options are Static IP, DHCP (cable modem), PPPoE (ADSL), and PPTP. Each option changes the parameters displayed below it. (Default: DHCP).
DHCP Enables Dynamic Host Configuration Protocol (DHCP) for the WAN port. This setting allows the Wireless Broadband Router to automatically obtain an IP address from a DHCP server normally operated by the Internet Service Provider (ISP).
– 55 –