Barricade g Wireless Router with USB Print Server | Manual |
8.3 LAN
From this section, you can configure the Barricade g’s LAN interface and DHCP Server settings.
LAN IP – IP Address: This is the IP Address of your Barricade Router.
LAN IP – IP Subnet Mask: Default is 255.255.255.0.
DHCP Server: DHCP is enabled by default, if you have another DHCP server on your network or you don’t want to use DHCP, click the [Disabled] option.
Lease Time: This is the amount of time that a network user will be allowed a connection to the Barricade with there current dynamic IP Address settings. For home networks, this may be set to [Forever], which means there is no time limit on the IP address that is assigned to a client on your network.
IP Address Pool – Start IP: This is the Starting IP Address of the range of IP Addresses that you want
to be available for DHCP clients. Default is: 192.168.2.100
IP Address Pool – End IP: This is the ending IP Address of the range of IP Addresses that you want
to be available for DHCP clients. Default is: 192.168.2.199
NOTE: Do not include the address of the Barricade g in the DHCP client address pool.
Domain Name: This is the Domain name that will be assigned to the DHCP clients.
24