Barricade g Wireless Router with USB Print Server | Manual |
A.3 I have another IP Address displayed
If you have another IP address listed, then the PC may not be configured for a DHCP connection. Please refer to Chapter 4 Configure your Computer for information.
Once you have confirmed your computer is configured for DHCP, and then please follow the steps below.
1.Open a DOS window as described above.
2.Type “ipconfig /release” (without the quotes)
3. Then type “ipconfig /renew” (without the quotes)
Once you are able to get a valid IP address from the Barricade Router, then you can now access the
If you still are not getting an IP address from the Barricade, please reset the router as outlined in Chapter 2 and follow the steps outlined in this appendix again.
If you still cannot access the router once you have reset it, please contact SMC Technical Support.
58