Barricade g Wireless Router with USB Print Server | Manual |
8.5.2 Special Applications
This section allows you to configure dynamic port forwarding rules by using an outgoing trigger port.
Trigger Port: Enter in the outgoing port that will be used to open the public ports
Trigger Type: Choose the protocol type, TCP or UDP traffic.
Public Port: Set the Incoming Range of ports that will be opened by the outgoing trigger port data. The maximum range that you can use for all NAT ports is 0 to 65535.
Public Type: Choose the protocol type, TCP or UDP traffic.
Enabled: You can enable or disable these rules as needed.
NOTE: For security, if you are not using a Special Applications rule, it is recommended that you disable the rule until needed.
Need Port Info?
For a list of the ports required by some of the popular online games and other applications please refer to Appendix C SMC Port List for Games and Applications.
31