SMC Networks 48-Port manual Optional Media Extender Modules, Multicast Switching, Traffic Priority

Page 21

ABOUT THE TIGERSWITCH 10/100

Multicast Switching

Specific multicast traffic can be assigned to its own VLAN to ensure that it does not interfere with normal network traffic and to guarantee real-time delivery by setting the required priority level for the designated VLAN. The switch uses IGMP Snooping and IGMP to manage multicast group registration.

Traffic Priority

This switch provides Quality of Service (QoS) by prioritizing each packet based on the required level of service, using two distinct categories with Weighted Fair Queuing. It uses IEEE 802.1p and 802.1Q tags to prioritize incoming traffic based on input from the end-station application. These functions can be used to provide independent priorities for delay-sensitive data and best-effort data.

Optional Media Extender Modules

Figure 1-5. 2-Port 100BASE-FX Fiber Module (SMC6900FSC)

Using fiber optic cable, the 100BASE-FX port can be connected to a remote site up to 2 km (1.24 miles) away. This port operates only at 100 Mbps, full duplex. This module is fitted with an SC connector, but you can attach an ST plug to the switch using the optional SC-ST Converter (Part Number: 99-012034-091).

1-7

Page 20 Page 22
Image 21
Page 20 Page 22
Contents TigerSwitch 10/100 Page TigerSwitch 10/100 Installation Guide Trademarks Limited Warranty Limited Warranty Compliances FCC Class aEC Conformance Declaration Class a Industry Canada Class a Iii Safety ComplianceWarnhinweis Faseroptikanschlüsse Optische Sicherheit Underwriters Laboratories Compliance StatementWichtige Sicherheitshinweise Germany Table of Contents Installing the Switch Troubleshooting A-1Making Network Connections Cables B-1 Specifications C-1Ordering Information D-1 Glossary Index ViiViii Overview Chapter About Tigerswitch 10/100Rear Panel Switch ArchitectureDescription of Hardware Management Options10BASE-T/100BASE-TX Ports SMC6948L2 LED Status LEDsNetwork Management Module Network Management ModuleVLANs Spanning Tree ProtocolMulticast Switching Optional Media Extender ModulesTraffic Priority Power Supply Receptacles Optional Redundant Power Unit SMCRPU150WFeatures and Benefits ConnectivityExpandability Management PerformanceChapter Network Planning Introduction to SwitchingCollapsed Backbone Sample ApplicationsCentral Wiring Closet Central Wiring ClosetRemote Connections with Fiber Cable Collapsed Backbone Using Fiber CableMaking Vlan Connections Making Vlan ConnectionsConnectivity Rules Mbps Gigabit Ethernet Collision DomainMaximum Fiber Optic Cable Distance for 1000BASE-SX Mbps Fast Ethernet Collision Domain Maximum Network Diameter Using RepeatersSMC 3-2 Rule for Class II Repeaters SMC 2-1 Rule for Class I RepeatersMbps Ethernet Collision Domain SMC 5-4-3 RuleMaximum Ethernet Cable Distance Application Notes Network Planning Selecting a Site Installing the SwitchEquipment Checklist Package ContentsOptional Rack-Mounting Equipment Rack Mounting MountingAttaching the Brackets Attaching the Adhesive Feet Desktop or Shelf MountingPower Receptacle Connecting to a Power SourceChapter Making Network Connections Connecting Network Devices1. Making Twisted-Pair Connections Connecting to PCs, Servers, Hubs and SwitchesWiring Closet Connections Wiring Closet ConnectionsFiber Optic Devices Making SC Port Connections Making Network Connections Diagnosing Switch Indicators Appendix a TroubleshootingPower and Cooling Problems InstallationIn-Band Access Troubleshooting Troubleshooting Appendix B Cables SpecificationsTwisted-Pair Cable and Pin Assignments Figure B-1. RJ-45 Connector Pin Numbers100BASE-TX/10BASE-T Pin Assignments Straight-Through WiringCrossover Wiring Figure B-2. DB-9 Console Port Pin Numbers Console Port Pin AssignmentsDB-9 Port Pin Assignments Console Port to 9-Pin COM Port on PCConsole Port to 25-Pin DCE Port on Modem Console Port to 25-Pin DTE Port on PC Cables Physical Characteristics Appendix C SpecificationsTemperature WeightPower Supply Power ConsumptionSwitch Features Management Features Standards SafetyCompliances EmissionsWarranty 100BASE-FX Extender Module Slide-in Module1000BASE-SX Extender Module ModelSMC6948NMM Appendix D Ordering Information Ordering Information Glossary-1 GlossaryAuto-Negotiation BandwidthGlossary-2 Glossary-3 Glossary-4 Glossary-5 Glossary-6 Index-1 IndexIndex-2 See RPU Index-3Index-4 Page Internet

48-Port specifications

SMC Networks is a recognized leader in providing high-performance networking solutions, and its 48-Port Gigabit Ethernet Switch is a standout product in their lineup. Designed to cater to the demands of growing businesses and enterprise environments, this switch offers robust features and advanced technologies tailored for optimal network performance.

One of the main features of the SMC Networks 48-Port switch is its extensive port availability. With 48 Gigabit Ethernet ports, this switch allows for a substantial number of devices to connect simultaneously, making it an ideal choice for larger networks, data centers, and server farms. The switch supports auto-MDI/MDI-X functionality, which simplifies cable management by automatically detecting and configuring the appropriate cabling for each port.

The SMC Networks switch is built with Layer 2 switching capabilities, providing essential functionality such as VLAN support, link aggregation, and Spanning Tree Protocol (STP). VLANs enable network segmentation, enhancing security and performance by isolating traffic within defined groups. Link aggregation allows multiple connections to be bundled, increasing bandwidth and providing redundancy in the case of a link failure, thus ensuring uninterrupted network access.

In terms of performance, the switch boasts a non-blocking architecture that allows all ports to maintain the maximum data throughput of 1000 Mbps. This is essential for environments that handle large amounts of data traffic, such as video streaming, data backups, and cloud applications. Furthermore, the switch supports Quality of Service (QoS), allowing administrators to prioritize specific types of network traffic. This ensures that high-priority applications receive the bandwidth they need, thus providing a smooth and responsive user experience.

SMC Networks also emphasizes energy efficiency in its design. The switch is built to comply with IEEE 802.3az Energy-Efficient Ethernet standards, which reduces power consumption during periods of low traffic without compromising overall performance.

With a robust metal chassis, the 48-Port switch is not only durable but also designed for easy integration into existing network environments. It supports both rack-mount and desktop configurations, giving users flexibility in deployment.

In summary, the SMC Networks 48-Port Gigabit Ethernet Switch combines high port density, advanced switching capabilities, and energy efficiency, making it an excellent choice for modern networking needs. Its features are tailored to improve connectivity, optimize performance, and enhance network management in any professional environment.
Top Page Image Contents