Installing the Speakers on the Tallboy Stand
*
*
02 Connections
1.Turn the Stand Base upside-down and connect it to the Stand.
2.Insert small screws (4*20, For connecting Stand & Stand Base) clockwise into the four holes marked using a screwdriver as shown in the illustration.
!CAUTION : When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle or can be damaged. (torque screw- driver- below 15 kg.f.cm)
3.Connect the upper Speaker to the assembled Stand.
4.Insert another large screw (5*15, For connecting Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver.
1 |
Stand |
Base |
Stand |
2 |
|
3 | Speaker |
|
Stand
4
5. This is the appearance after the speaker is installed. Follow this steps | 5 |
|
|
|
|
to install other speaker. |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|