Advanced Functions
USB Recording
While playing CDDA (Compact Disc Digital Audio) using the USB Recording function or listening to the FM radio or receiving audio source from an external device, you can record the audio source in the USB memory.
Ex) USB recording of CDDA audio contents
1.Connect the USB device to your product.
2.Insert the CDDA disc into the CD tray.
3. Press the USB REC button on the remote control.
~ To start ripping the current track, press the USB REC button on the remote control while the system is playing a track or stopped temporarily.
~To record the entire CD, press and hold the USB REC button on the remote control.
-"FULL CD RIPPING" appears on the display and recording starts.
4.Press the STOP (@) button to stop recording.
~When USB recording of a CD is completed, you will find a new folder named “RECORDING” in the USB drive. The contents will be saved in the folder in the MP3 format.
~When USB recording of FM radio or AUX source is completed, you will find a new folder named “TUNER RECORDING or AUX RECORDING” in the USB drive. The contents will be saved in the folder in the MP3 format.
✎NOTE
`Do not disconnect the USB connection or the power cable during the USB Recording. Otherwise, it may cause damage to the data. To stop USB Recording, press the STOP button and disconnect the USB device after the system stops playing the CD completely.
`If you disconnect the USB connection during the USB Recording, the system will turn off and you will not be able to delete the recorded file.
`If you connect the USB device to the system while it is playing a CD, the system stops temporarily and will play again.
`DTS-CDs cannot be recorded.
`If the recording duration is less than 5 seconds, a recording file may not be created.
`USB Recoridng works only if the USB device is formatted in the FAT file system. (The NTFS file system is not supported.)
`The audio signal will not be output during USB recording of the CD.
`When HDMI AUDIO is set to On, the USB Recording function is not supported.