Audio
Speaker Setting
Speaker Size
You can set the Speaker Size of the Center and Surround Speakers, as well as Test Tone in this mode.
Settings
Speaker Setting
Speaker Size | ▶ |
Sound Edit |
|
Delay Time |
|
Test Tone | : Off |
" Select ' Return
mMove " Select ' Return
~For the Front, the mode is set to Small.
~For the Subwoofer, the mode is set to Present.
~For the Center and Surround, you can switch the mode to Small or None.
-Small : Select this when using the speakers.
-None : Select this when no speaker is connected.
✎NOTE
`The speaker mode may vary depending on the Dolby Pro Logic and Stereo settings.
Sound Edit
You can adjust the balance and level for each speaker.
Settings
Sound Edit
| Front Bal. | dB L |
|
|
|
| R | dB |
| |||
|
|
|
|
|
| |||||||
| Surround Bal. | dB L |
|
|
|
| R | dB | ||||
|
|
|
| |||||||||
| Center Level |
|
|
|
|
|
|
|
| dB | ||
|
|
|
|
|
|
|
|
| ||||
| Surround Level |
|
|
|
|
|
|
|
| dB | ||
|
|
|
|
|
|
|
|
| ||||
| SW Level |
|
|
|
|
|
|
|
| dB | ||
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| ||
|
| <Change " Select ' Return | ||||||||||
|
| mMove | " Select | ' Return | ||||||||
Press the $% buttons to select and adjust the desired speaker.
Press the _+ buttons to adjust the settings.
|
| 03 |
Adjusting Front/Surround Bal. | Setup | |
| ||
` | You can select between 0 and |
|
` | The volume decreases as you move closer to |
|
Adjusting Center/Surround/Subwoofer Level
`The volume level can be adjusted in steps from +6dB to
`The sound gets louder as you move closer to +6dB and quieter as you get closer to
Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the Center and Surround speakers.
You can also set the Test Tone in this mode.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a
delay effect to the Center and Surround Speakers.
Settings
Delay Time
Front
Center | : 00mSEC |
Surround | : 10mSEC |
Subwoofer |
|
Test Tone | : Off |
<Change " Select ' Return
mMove " Select ' Return
✎NOTE
`The Delay Time menu will be activated only when a 5.1 channel source is played.
`You can not set Center and Surround in this mode when their Speaker Size is set to NONE.