Samsung How to Connect SWA-5000 Wireless Receiver Module

Connecting the Optional Wireless Receiver Module

To connect the surround speakers wirelessly, you have to purchase the wireless receiver module and TX card from your Samsung retailer.

*This product should be connected with the SWA-5000 only.

In case of HT-D550

02 Connections

Surround	Surround
Speaker (L)	Speaker (R)

Center Speaker

Front Speaker (R) Front Speaker (L)

SPEAKERS OUT

		A
		O
SURROUND	SUBWOOFER	SURROUND

Wireless Receiver Module

Subwoofer

* Refer to page 16 for the HT-D553/D555 speakers.

Wireless Receiver Module (SWA-5000)

1.Press down the terminal tab on the back of the speaker.

(HT-D553/HT-D555 only)

2. Insert the black wire into the black terminal (–) and the red wire into the red terminal (+), and then release the tab. (HT-D553/HT-D555 only)

3.	Connect the connecting plugs to the back of the product by matching the colors	Black	Red
	of the speaker plugs to the speaker jacks.
4.	With the product turned off, insert the TX card into the
	TX Card Connection (WIRELESS) on the back of the product.
	~ Hold the TX card so that the label "WIRELESS" faces upward and insert
	the card into the port.
	~ The TX card enables communication between the product and the
	wireless receiver module.
5.	Connect the left and right surround speakers to the wireless Receiver module.		WIRELESS

6.Plug the power cord of the wireless Receiver module in the wall outlet .

TX card

English 19