Seagate ST1000NM0033 manual Document Revision History

Page 2

Document Revision History

Revision

Date

Description of changes

 

 

 

Rev. A

10/05/2011

Initial release.

 

 

 

Rev. B

10/31/2011

37.

 

 

 

© 2012 Seagate Technology LLC. All rights reserved.

Publication number: 100671510, Rev. B October 2012

Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Constellation ES and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments.All other trademarks or registered trademarks are the property of their respective owners.

No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. Call 877-PUB-TEK1 (877-782-8351) to request permission.

When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Actual quantities will vary based on various factors, including file size, file format, features and application software. Actual data rates may vary depending on operating environment and other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit www.bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice, product offerings or specifications.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Constellation ES.3 SAS Document Revision History Contents Installation Contents Seagate Technology Support Services Scope SEDApplicable Standards and Reference Documentation StandardsTaiwanese Bsmi Australian C-TickKorean KCC European Union Restriction of Hazardous Substances RoHSChina Restriction of Hazardous Substances RoHS Directive Reference DocumentsGeneral Description Performance Standard FeaturesMedia Description Formatted Capacities FACTORY-INSTALLED OptionsReliability Programmable Drive CapacityFormat command execution time for 512-byte sectors minutes Performance CharacteristicsInternal Drive Characteristics General performance characteristicsCache Operation START/STOP TimePREFETCH/MULTI-SEGMENTED Cache Control Caching write data Prefetch operationReliability and Service Reliability SpecificationsError Rates Hot plugging the drive 3 S.M.A.R.TReporting control Controlling S.M.A.R.TPerformance impact Determining rateDST failure definition State of the drive prior to testingDrive Self Test DST ImplementationShort test Function Code 001b Invoking DSTShort and extended tests Extended test Function Code 010bStorage Product warrantyShipping Product repair and return informationPowerChoice modes PHYSICAL/ELECTRICAL SpecificationsPowerchoicetm Power Management AC Power Requirements DC Power Requirements4TB drive DC power requirements 3TB drive DC power requirements 2TB drive DC power requirements 1TB drive DC power requirements Conducted noise immunity General DC power requirement notesPower sequencing Current profiles TB model current profilesTB model current profiles TB model current profiles TB model current profiles 4TB models in 6Gb operation Power Dissipation4TB models in 3Gb operation 3TB models in 3Gb operation 3TB models in 6Gb operation2TB models in 3Gb operation 2TB models in 6Gb operation1TB models in 3Gb operation 1TB models in 6Gb operationImage is for reference only, may not represent actual drive Temperature a. OperatingEnvironmental Limits Relative humidityShock and vibration ShockRecommended mounting Acoustics Air cleanlinessVibration Corrosive environmentMechanical Specifications 1TBSeagate Enterprise SED PurposeValidation Program Security LevelData Encryption Controlled AccessAbout SELF-ENCRYPTING Drives Random Number Generator RNGSupported Commands Authenticated Firmware DownloadPower Requirements Data BandsDrive Error Recovery Procedures Defect and Error ManagementDrive Internal DEFECTS/ERRORS SAS System Errors Background Media ScanIdle Read After Write Media PRE-SCANDeferred AUTO-REALLOCATION Protection Information PISetting and determining the current Type Level Identifying a Protection Information driveCooling InstallationDrive Orientation Drive Mounting X = F 15lb = 67NGrounding Task management functions SAS FeaturesInterface Requirements Task management responsesScsi Commands Supported Supported commands Supported commands Supported commands Inquiry data Constellation ES.3 inquiry dataMode Sense data Block Descriptor CHG 9C 0A 9D 0F FF FF FF FF FF FF FF FF DEF 12 1400 FF FF 00 00 FF FF FF FF 80 20 00 00 00 00 00 Miscellaneous Operating Features and Conditions Miscellaneous featuresSAS physical interface Datum B Section C C Section a a Electrical description Physical characteristicsConnector requirements Pin descriptionsSAS transmitters and receivers PowerSignal Characteristics Ready LED OutAdditional Information Differential signalsSAS-2 Specification Compliance Index Page KCC See also cooling Page Seagate Technology LLC
Related manuals
Manual 52 pages 18.94 Kb

ST1000NM0033 specifications

The Seagate ST1000NM0033 is a high-performance hard disk drive (HDD) designed specifically for enterprise applications. With a storage capacity of 1TB, it offers a balance of performance, reliability, and efficiency, making it suitable for data centers, cloud storage, and server environments. Built with Seagate's robust engineering, the ST1000NM0033 is ideal for handling heavy workloads and intensive data processes.

One of the standout features of this HDD is its rotational speed of 7200 RPM. This speed allows for quick data access and fast read/write operations, which is essential for data-intensive applications. The drive is equipped with 64MB of cache, further enhancing its efficiency by speeding up data retrieval for frequently accessed files.

Another key characteristic of the ST1000NM0033 is its SATA interface, which typically facilitates high-bandwidth data transfer rates. With a sustained data transfer rate of up to 160 MB/s, it ensures that large files, such as videos and databases, can be transferred swiftly, minimizing downtime and improving overall system performance.

The drive's durability is backed by Seagate’s Advanced Format technology, which enhances the format compatibility, storage efficiency, and reliability of the drive through improved error correction. With a mean time between failures (MTBF) rating of 1 million hours, users can trust the STA0033 to provide exceptional longevity and stability, critical in enterprise environments where data integrity is paramount.

Furthermore, the ST1000NM0033 supports various workload types due to its design optimized for multi-user environments. The drive can handle up to 180TB/year workload rate, making it capable of supporting applications with high data demand.

Environmentally, Seagate ensures that this model is energy efficient, contributing to reduced power consumption in enterprise settings. The drive operates effectively within a specified temperature range, ensuring that it remains operational under different environmental conditions.

In summary, the Seagate ST1000NM0033 is an excellent choice for businesses seeking a reliable, high-capacity HDD with robust performance features. Its combination of speed, efficiency, durability, and capacity positions it as a strong contender in the enterprise storage solutions market. With its extensive feature set, it continues to cater to the demanding needs of modern data centers and enterprise applications.
Top Page Image Contents