Seagate ST1000NM0033 manual Scope, Sed

Page 7

1.0SCOPE

This manual describes Seagate Technology® LLC, Constellation® ES.3 SAS (Serial Attached SCSI) disk drives.

Constellation ES.3 drives support the SAS Protocol specifications to the extent described in this manual. The SAS Interface Manual (part number 100293071) describes the general SAS characteristics of this and other Seagate SAS drives. The Self-Encrypting Drive Reference Manual, part number 100515636, describes the interface, general operation, and security features available on Self-Encrypting Drive models.

Product data communicated in this manual is specific only to the model numbers listed in this manual. The data listed in this manual may not be predictive of future generation specifications or requirements. If you are designing a system which will use one of the models listed or future generation products and need further assistance, please contact your Field Applications Engineer (FAE) or our global support services group as shown in See “Seagate® Technology Support Services” on page 1.

Unless otherwise stated, the information in this manual applies to standard and Self-Encrypting Drive models.

Standard models

SELF-ENCRYPTING DRIVE

SED-ISE DRIVE

FIPS 140-2 LEVEL 2

(SED)

(INSTANT SECURE ERASE) 1

(REVIEW PENDING)

 

ST4000NM0023

ST4000NM0043

ST4000NM0113

ST4000NM0063

 

 

 

 

ST3000NM0023

ST3000NM0043

ST3000NM0113

ST3000NM0063

 

 

 

 

ST2000NM0023

ST2000NM0043

ST2000NM0113

ST2000NM0063

 

 

 

 

ST1000NM0023

ST1000NM0043

ST1000NM0113

ST1000NM0063

 

 

 

 

1.Specific features may not be available in all models or countries -- contact Seagate for availability.

Previous generations of Seagate Self-Encrypting Drive models were called Full Disk NOTE Encryption (FDE) models before a differentiation between drive-based encryption and

other forms of encryption was necessary.

.

The Self-Encrypting Drive models indicated on the cover of this product manual have

NOTE provisions for “Security of Data at Rest” based on the standards defined by the Trusted

Computing Group (see www.trustedcomputinggroup.org).

For more information on FIPS 140-2 Level 2 certification see Section 7.0 on page 38.

CONSTELLATION ES.3 SAS PRODUCT MANUAL, REV. B

2

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Constellation ES.3 SAS Document Revision History Contents Installation Contents Seagate Technology Support Services SED ScopeStandards Applicable Standards and Reference DocumentationEuropean Union Restriction of Hazardous Substances RoHS Australian C-TickKorean KCC Taiwanese BsmiReference Documents China Restriction of Hazardous Substances RoHS DirectiveGeneral Description Media Description Standard FeaturesPerformance Programmable Drive Capacity FACTORY-INSTALLED OptionsReliability Formatted CapacitiesGeneral performance characteristics Performance CharacteristicsInternal Drive Characteristics Format command execution time for 512-byte sectors minutesPREFETCH/MULTI-SEGMENTED Cache Control START/STOP TimeCache Operation Prefetch operation Caching write dataError Rates Reliability SpecificationsReliability and Service 3 S.M.A.R.T Hot plugging the driveDetermining rate Controlling S.M.A.R.TPerformance impact Reporting controlImplementation State of the drive prior to testingDrive Self Test DST DST failure definitionExtended test Function Code 010b Invoking DSTShort and extended tests Short test Function Code 001bProduct repair and return information Product warrantyShipping StoragePowerchoicetm Power Management PHYSICAL/ELECTRICAL SpecificationsPowerChoice modes DC Power Requirements AC Power Requirements4TB drive DC power requirements 3TB drive DC power requirements 2TB drive DC power requirements 1TB drive DC power requirements Power sequencing General DC power requirement notesConducted noise immunity TB model current profiles Current profilesTB model current profiles TB model current profiles TB model current profiles 4TB models in 3Gb operation Power Dissipation4TB models in 6Gb operation 3TB models in 6Gb operation 3TB models in 3Gb operation2TB models in 6Gb operation 2TB models in 3Gb operation1TB models in 6Gb operation 1TB models in 3Gb operationRelative humidity Temperature a. OperatingEnvironmental Limits Image is for reference only, may not represent actual driveShock Shock and vibrationRecommended mounting Corrosive environment Air cleanlinessVibration Acoustics1TB Mechanical SpecificationsSecurity Level PurposeValidation Program Seagate Enterprise SEDRandom Number Generator RNG Controlled AccessAbout SELF-ENCRYPTING Drives Data EncryptionData Bands Authenticated Firmware DownloadPower Requirements Supported CommandsDrive Internal DEFECTS/ERRORS Defect and Error ManagementDrive Error Recovery Procedures Background Media Scan SAS System ErrorsProtection Information PI Media PRE-SCANDeferred AUTO-REALLOCATION Idle Read After WriteIdentifying a Protection Information drive Setting and determining the current Type LevelDrive Orientation InstallationCooling X = F 15lb = 67N Drive MountingGrounding Task management responses SAS FeaturesInterface Requirements Task management functionsScsi Commands Supported Supported commands Supported commands Supported commands Constellation ES.3 inquiry data Inquiry dataMode Sense data Block Descriptor CHG 9C 0A 9D 0F FF FF FF FF FF FF FF FF DEF 12 1400 FF FF 00 00 FF FF FF FF 80 20 00 00 00 00 00 Miscellaneous features Miscellaneous Operating Features and ConditionsSAS physical interface Datum B Section C C Section a a Pin descriptions Physical characteristicsConnector requirements Electrical descriptionReady LED Out PowerSignal Characteristics SAS transmitters and receiversSAS-2 Specification Compliance Differential signalsAdditional Information Index Page KCC See also cooling Page Seagate Technology LLC
Related manuals
Manual 52 pages 18.94 Kb

ST1000NM0033 specifications

The Seagate ST1000NM0033 is a high-performance hard disk drive (HDD) designed specifically for enterprise applications. With a storage capacity of 1TB, it offers a balance of performance, reliability, and efficiency, making it suitable for data centers, cloud storage, and server environments. Built with Seagate's robust engineering, the ST1000NM0033 is ideal for handling heavy workloads and intensive data processes.

One of the standout features of this HDD is its rotational speed of 7200 RPM. This speed allows for quick data access and fast read/write operations, which is essential for data-intensive applications. The drive is equipped with 64MB of cache, further enhancing its efficiency by speeding up data retrieval for frequently accessed files.

Another key characteristic of the ST1000NM0033 is its SATA interface, which typically facilitates high-bandwidth data transfer rates. With a sustained data transfer rate of up to 160 MB/s, it ensures that large files, such as videos and databases, can be transferred swiftly, minimizing downtime and improving overall system performance.

The drive's durability is backed by Seagate’s Advanced Format technology, which enhances the format compatibility, storage efficiency, and reliability of the drive through improved error correction. With a mean time between failures (MTBF) rating of 1 million hours, users can trust the STA0033 to provide exceptional longevity and stability, critical in enterprise environments where data integrity is paramount.

Furthermore, the ST1000NM0033 supports various workload types due to its design optimized for multi-user environments. The drive can handle up to 180TB/year workload rate, making it capable of supporting applications with high data demand.

Environmentally, Seagate ensures that this model is energy efficient, contributing to reduced power consumption in enterprise settings. The drive operates effectively within a specified temperature range, ensuring that it remains operational under different environmental conditions.

In summary, the Seagate ST1000NM0033 is an excellent choice for businesses seeking a reliable, high-capacity HDD with robust performance features. Its combination of speed, efficiency, durability, and capacity positions it as a strong contender in the enterprise storage solutions market. With its extensive feature set, it continues to cater to the demanding needs of modern data centers and enterprise applications.
Top Page Image Contents