Seagate ST1000NM0033 Product warranty, Shipping, Storage, Product repair and return information

Page 22

You can abort a DST executing in background mode by using the abort code in the DST Function Code field. This will cause a 01 (self- test aborted by the application client) code to appear in the self-test results values log. All other abort mechanisms will be reported as a 02 (self-test routine was interrupted by a reset condition).

5.2.6Product warranty

See “Seagate® Technology Support Services” on page 1 for warranty contact information.

Shipping

When transporting or shipping a drive, use only a Seagate-approved container. Keep your original box. Seagate approved containers are easily identified by the Seagate Approved Package label. Shipping a drive in a non-approved container voids the drive warranty.

Seagate repair centers may refuse receipt of components improperly packaged or obviously damaged in transit. Contact your authorized Seagate distributor to purchase additional boxes. Seagate recommends shipping by an air-ride carrier experienced in handling computer equipment.

Storage

The maximum recommended storage period for the drive in a non-operational environment is 90 days. Drives should be stored in the original unopened Seagate shipping packaging whenever possible. Once the drive is removed from the Seagate original packaging the recommended maximum period between drive operation cycles is 30 days. During any storage period the drive non-operational tempera- ture, humidity, wet bulb, atmospheric conditions, shock, vibration, magnetic and electrical field specifications should be followed.

Product repair and return information

Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate does not sanction any third-party repair facilities. Any unauthorized repair or tampering with the factory seal voids the warranty.

CONSTELLATION ES.3 SAS PRODUCT MANUAL, REV. B

17

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Constellation ES.3 SAS Document Revision History Contents Installation Contents Seagate Technology Support Services Scope SEDApplicable Standards and Reference Documentation StandardsTaiwanese Bsmi Australian C-TickKorean KCC European Union Restriction of Hazardous Substances RoHSChina Restriction of Hazardous Substances RoHS Directive Reference DocumentsGeneral Description Media Description Standard FeaturesPerformance Formatted Capacities FACTORY-INSTALLED OptionsReliability Programmable Drive CapacityFormat command execution time for 512-byte sectors minutes Performance CharacteristicsInternal Drive Characteristics General performance characteristicsPREFETCH/MULTI-SEGMENTED Cache Control START/STOP TimeCache Operation Caching write data Prefetch operationError Rates Reliability SpecificationsReliability and Service Hot plugging the drive 3 S.M.A.R.TReporting control Controlling S.M.A.R.TPerformance impact Determining rateDST failure definition State of the drive prior to testingDrive Self Test DST ImplementationShort test Function Code 001b Invoking DSTShort and extended tests Extended test Function Code 010bStorage Product warrantyShipping Product repair and return informationPowerchoicetm Power Management PHYSICAL/ELECTRICAL SpecificationsPowerChoice modes AC Power Requirements DC Power Requirements4TB drive DC power requirements 3TB drive DC power requirements 2TB drive DC power requirements 1TB drive DC power requirements Power sequencing General DC power requirement notesConducted noise immunity Current profiles TB model current profilesTB model current profiles TB model current profiles TB model current profiles 4TB models in 3Gb operation Power Dissipation4TB models in 6Gb operation 3TB models in 3Gb operation 3TB models in 6Gb operation2TB models in 3Gb operation 2TB models in 6Gb operation1TB models in 3Gb operation 1TB models in 6Gb operationImage is for reference only, may not represent actual drive Temperature a. OperatingEnvironmental Limits Relative humidityShock and vibration ShockRecommended mounting Acoustics Air cleanlinessVibration Corrosive environmentMechanical Specifications 1TBSeagate Enterprise SED PurposeValidation Program Security LevelData Encryption Controlled AccessAbout SELF-ENCRYPTING Drives Random Number Generator RNGSupported Commands Authenticated Firmware DownloadPower Requirements Data BandsDrive Internal DEFECTS/ERRORS Defect and Error ManagementDrive Error Recovery Procedures SAS System Errors Background Media ScanIdle Read After Write Media PRE-SCANDeferred AUTO-REALLOCATION Protection Information PISetting and determining the current Type Level Identifying a Protection Information driveDrive Orientation InstallationCooling Drive Mounting X = F 15lb = 67NGrounding Task management functions SAS FeaturesInterface Requirements Task management responsesScsi Commands Supported Supported commands Supported commands Supported commands Inquiry data Constellation ES.3 inquiry dataMode Sense data Block Descriptor CHG 9C 0A 9D 0F FF FF FF FF FF FF FF FF DEF 12 1400 FF FF 00 00 FF FF FF FF 80 20 00 00 00 00 00 Miscellaneous Operating Features and Conditions Miscellaneous featuresSAS physical interface Datum B Section C C Section a a Electrical description Physical characteristicsConnector requirements Pin descriptionsSAS transmitters and receivers PowerSignal Characteristics Ready LED OutSAS-2 Specification Compliance Differential signalsAdditional Information Index Page KCC See also cooling Page Seagate Technology LLC
Related manuals
Manual 52 pages 18.94 Kb

ST1000NM0033 specifications

The Seagate ST1000NM0033 is a high-performance hard disk drive (HDD) designed specifically for enterprise applications. With a storage capacity of 1TB, it offers a balance of performance, reliability, and efficiency, making it suitable for data centers, cloud storage, and server environments. Built with Seagate's robust engineering, the ST1000NM0033 is ideal for handling heavy workloads and intensive data processes.

One of the standout features of this HDD is its rotational speed of 7200 RPM. This speed allows for quick data access and fast read/write operations, which is essential for data-intensive applications. The drive is equipped with 64MB of cache, further enhancing its efficiency by speeding up data retrieval for frequently accessed files.

Another key characteristic of the ST1000NM0033 is its SATA interface, which typically facilitates high-bandwidth data transfer rates. With a sustained data transfer rate of up to 160 MB/s, it ensures that large files, such as videos and databases, can be transferred swiftly, minimizing downtime and improving overall system performance.

The drive's durability is backed by Seagate’s Advanced Format technology, which enhances the format compatibility, storage efficiency, and reliability of the drive through improved error correction. With a mean time between failures (MTBF) rating of 1 million hours, users can trust the STA0033 to provide exceptional longevity and stability, critical in enterprise environments where data integrity is paramount.

Furthermore, the ST1000NM0033 supports various workload types due to its design optimized for multi-user environments. The drive can handle up to 180TB/year workload rate, making it capable of supporting applications with high data demand.

Environmentally, Seagate ensures that this model is energy efficient, contributing to reduced power consumption in enterprise settings. The drive operates effectively within a specified temperature range, ensuring that it remains operational under different environmental conditions.

In summary, the Seagate ST1000NM0033 is an excellent choice for businesses seeking a reliable, high-capacity HDD with robust performance features. Its combination of speed, efficiency, durability, and capacity positions it as a strong contender in the enterprise storage solutions market. With its extensive feature set, it continues to cater to the demanding needs of modern data centers and enterprise applications.
Top Page Image Contents