Seagate U Series 9 CE manual 4 S.M.A.R.T. commands, Code in features Register A.R.T. command

Page 39

4.1.4S.M.A.R.T. commands

S.M.A.R.T. provides near-term failure prediction for disc drives. When S.M.A.R.T. is enabled, the drive moni- tors predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is likely, S.M.A.R.T. makes a status report available to the host. Not all failures are predictable. S.M.A.R.T. predictability is limited to the attributes the drive can monitor. For more information on S.M.A.R.T. commands and implementation, see the Draft ATA-6 Standard.

SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4H) that elimi- nates unnecessary drive returns. The diagnostic software ships with all new drives and is also available at: http://seatools.seagate.com.

This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T. to enable this feature. The table below shows the S.M.A.R.T. command codes that the drive uses.

Code in features

 

register

S.M.A.R.T. command

D0H

S.M.A.R.T. Read Data

D1H

Vendor-specific

D2H

S.M.A.R.T. Enable/Disable Attribute Autosave

D3H

S.M.A.R.T. Save Attribute Values

D4H

S.M.A.R.T. Execute Off-line Immediate (runs DST)

D5H

S.M.A.R.T. Read Log Sector

D6H

S.M.A.R.T. Write Log Sector

D7H

Vendor-specific

D8H

S.M.A.R.T. Enable Operations

D9H

S.M.A.R.T. Disable Operations

DAH

S.M.A.R.T. Return Status

Note. If an appropriate code is not written to the Features Register, the command is aborted and 0x04 (abort) is written to the Error register.

U Series 9 ce Product Manual, Rev. F

29

Image 39
Contents Series 9 ce Page Series 9 ce Page Revision status summary sheet Page Contents Series 9 ce Product Manual, Rev. F List of Figures Viii Series 9 ce Product Manual, Rev. F Introduction Series 9 ce Product Manual, Rev. F Specification summary table Drive specificationsSeries 9 ce Product Manual, Rev. F Physical organization Default logical geometryLBA mode Formatted capacityStart/stop times Physical characteristicsPower specifications Seek timeRead/write power and current Power consumptionSpinup power Seek modeTypical 5V startup and operation current profile Typical current profileSleep mode Power-management modesActive mode Idle modeEnvironmental specifications Acoustics Electromagnetic immunity ReliabilityFluid Dynamic Bearing FDB motor acoustics Agency certification Page Handling and static discharge precautions Configuring and mounting the driveBreather filter hole location Breather filter hole precautionsCable-select option Jumper settingsMaster/slave configuration Drive as master with a non-ATA-compatible slaveUltra ATA/100 cable Drive mountingMounting dimensions-top, side and end view Series 9 ce Product Manual, Rev. F ATA interface ATA interface signals and connector pinsO pins and supported ATA signals Command name Command code in hex ATA-standard commands Supported ATA commandsCommand name Command code in hex Word Description Value Identify Device commandXx07H Description if bit is set to Bit Word 0CH Set Features commandCode in features Register A.R.T. command 4 S.M.A.R.T. commandsSeries 9 ce Product Manual, Rev. F Technical Support Seagate Technology support servicesInternet MySeagate Reseller.seagate.com Presales SupportAuthorized Service Centers Warranty ServiceCall Center Toll-free Direct dial FAX / Internet Call Center Toll-free Direct dialAmericas +1-405-324-47301 +1-405-324-4704 Americas SEAGATE2 +1-405-324-47003 +1-405-324-4702FAX Services-All Europe toll call Call Center Presales and Technical Support Warranty ServiceToll-Free Support Numbers Asia/Pacific Support Services Series 9 ce Product Manual, Rev. F Numerics IndexPage Page Series 9 ce Product Manual, Rev. F Page Seagate Technology LLC

U Series 9 CE specifications

The Seagate U Series 9 CE (Consumer Electronics) is a robust external storage solution designed to meet the growing demands of consumers for reliable, high-capacity data storage. This portable hard drive boasts a combination of innovative technology, user-friendly features, and an appealing design, making it an excellent choice for multimedia enthusiasts and professionals alike.

One of the standout features of the Seagate U Series 9 CE is its impressive storage capacity options. Ranging from 1TB to 5TB, users have the flexibility to choose a size that suits their specific needs. This vast storage capability allows users to carry their entire media library, including photos, videos, music, and documents, all in one compact device.

The U Series 9 CE is equipped with USB 3.0 technology, offering high data transfer speeds that significantly reduce wait times when transferring large files. This backward-compatible interface ensures that users can connect to a wide array of devices, including laptops, desktops, and gaming consoles, without any hassle. The drive’s plug-and-play functionality further enhances the user experience, as it requires no additional software installation.

In terms of design, the Seagate U Series 9 CE is sleek and portable, featuring a lightweight chassis that easily fits into a backpack or purse. Its minimalist aesthetic comes in various color options, allowing users to choose a drive that reflects their personal style.

Security is a priority for any storage device, and the U Series 9 CE incorporates features to protect data. With software encryption options available, users can safeguard their sensitive information from unauthorized access. Additionally, the drive has been designed for durability, with protection against shock and vibration, ensuring that valuable data remains safe even in demanding conditions.

Lastly, Seagate backs the U Series 9 CE with a warranty, providing users with peace of mind regarding their investment. Overall, the Seagate U Series 9 CE stands out as a top-tier external hard drive that combines performance, portability, and security, making it an ideal choice for anyone seeking reliable digital storage solutions.