Seagate ST19171FC manual 101.60 250

Barracuda 9FC Installation Guide, Rev. A 17

Notes:

[1]Mounting holes three on each side, 6-32 UNC. Max screw length into side of drive is 0.15 in. (3.81 mm).

[2]Mounting holes four on bottom, 6-32 UNC.

Max screw length into bottom of drive is 0.15 in. (3.81 mm).

[3]Keep-out zone for any components on backplane.

[4]Connector is centered on module and flush with end of base.

	Inches			Millimeters
A	5.760	max		146.304 max
B	4.010	max		101.854 max
C	1.026	max		26.060 max
D	.620	ref		15.748	ref
E	4.000	±	0.010	101.600	± .25
F	.250	+	0.010	6.350	+ .25
		–	0.005		– .12
H	3.750	±	0.010	95.250	± .25
J	2.370	±	0.010	60.200	± .25
K	1.750	±	0.020	44.450	± .50
L	0.181	+	0.018	4.590	+ .45
		–	0.013		– .33
M	1.646	max		41.800 max
N	1.625	±	0.020	41.280	± .50
P	.1215	max		3.080 max
R	.1215	max		3.080 max