Seagate ST9100824AS, ST98823AS, ST96812AS, ST94813AS, ST93811AS manual Environmental specifications

Page 17

• Idle and Standby timers

Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and begins counting down from its specified delay times to zero. If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disc access is necessary.

2.10Environmental specifications

2.10.1Ambient temperature

Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 65°C (149°F) within the operating ambient conditions.

Above 1,000 feet (305 meters), the maximum temperature is derated linearly by 1°C every 1000 feet.

Operating:	5° to 55°C (41° to 131°F)

Nonoperating:	–40° to 70°C (–40° to 158°F)

2.10.2Temperature gradient

Operating	20°C per hour (68°F per hour max), without condensation

Nonoperating	30°C per hour (86°F per hour max), without condensation

2.10.3Humidity

2.10.3.1Relative humidity

Operating	5% to 90% noncondensing (30% per hour max)

Nonoperating	5% to 95% noncondensing (30% per hour max)

2.10.3.2Wet bulb temperature

Operating	30°C	(86°F max)

Nonoperating	40°C	(104°F max)

2.10.4Altitude

Operating	–304.8 m to 3,048 m (–1,000 ft to 10,000+ ft)

Nonoperating	–304.8 m to 12,192 m (–1,000 ft to 40,000+ ft)

Momentus 5400.2 SATA Product Manual, Rev. C

11

Image 17

Contents Momentus 5400.2 Sata Page Contents Momentus 5400.2 Sata Product Manual, Rev. C List of Figures Page Momentus 5400.2 Sata disc drive IntroductionAbout the Serial ATA interface Specification summary table Drive specificationsWarranty information for your drive LBA mode Default logical geometryFormatted capacity Cylinders Read/write heads Sectors per track 16,383Drive specification Physical characteristicsPhysical organization Recording and interface technologyStart/stop times Seek timeTypical seek times Typical seek times msec Read WritePower specifications Additional details Deferred spinupPower management modes Power-management modesActive mode Idle modeEnvironmental specifications Operating shock ShockNonoperating shock VibrationElectromagnetic immunity AcousticsDrive level acoustics Radio frequency environmentsMeasurement type Specification Safety certificationReliability Agency certificationFCC verification Korean RRLAustralian C-Tick N176 European Union Restriction of Hazardous Substances RoHS Environmental protectionCorrosive environment Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions-top, side and end viewMomentus 5400.2 Sata Product Manual, Rev. C Signal Serial ATA connector pin definitionsSerial ATA Sata interface Segment Pin Function DefinitionP10 Ground 2nd mate P11 Reserved Pin Function DefinitionCommand name Command code in hex ATA-standard commands Supported ATA commandsATA-standard security commands Command name Command code in hexMomentus 5400.2 Sata Product Manual, Rev. C Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordSet Features command values Set Features commandCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Internet Seagate Technology support servicesPresales Support Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE Sata Momentus 5400.2 Sata Product Manual, Rev. C Page Seagate Technology LLC