Seagate ST9200321AS, ST980310ASG manual Formatted capacity, Default logical geometry, LBA mode

Page 13

Table 1:

Drive specifications

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ST9160310AS

ST9120310AS

ST980310AS

Drive specification

ST9320320AS

ST9250320AS

ST9200321AS

ST9160310ASG

ST9120310ASG

ST980310ASG

 

 

 

 

 

 

 

 

Warranty

 

5 years on distribution units.

 

 

 

 

To determine the warranty for a specific drive, use a web browser to access the following web

 

 

page:

 

 

 

 

www.seagate.com/support/service/

 

 

 

 

From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive

 

 

serial number, model number (or part number) and country of purchase. The system will display

 

 

the warranty information for your drive.

 

 

 

 

 

 

Supports Hotplug operation per

Yes (requires COMPRESET from host after a hotplug event)

 

 

Serial ATA Revision 2.6 specifica-

 

 

 

 

 

 

tion

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby modes will not contribute to battery power consumption.

2.2Formatted capacity

Model

Formatted capacity*

Guaranteed sectors

Bytes per sector

 

 

 

 

ST9320320AS

320 Gbytes

625,142,448

512

 

 

 

 

ST9250320AS

250 Gbytes

488,397,168

512

 

 

 

 

ST9200321AS

200 Gbytes

390,721,968

512

 

 

 

 

ST9160310AS and ST9160310ASG

160 Gbytes

312,581,808

512

 

 

 

 

ST9120310AS and ST9120310ASG

120 Gbytes

234,441,648

512

 

 

 

 

ST980310AS and ST980310ASG

80 Gbytes

156,301,488

512

 

 

 

 

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

2.2.1LBA mode

When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1,where n is the number of guaranteed sectors as defined above.

See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48- bit addressing support of drives with capacities over 137 Gbytes.

2.3Default logical geometry

Cylinders

Read/write heads

Sectors per track

 

 

 

16,383

16

63

 

 

 

LBA mode

When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1,where n is the number of guaranteed sectors as defined above.

Momentus 5400.5 SATA Product Manual, Rev. B

5

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Momentus 5400.5 Sata Page Momentus 5400.5 Sata Product Manual, Rev. B Momentus 5400.5 Sata Product Manual, Rev. B Contents Momentus 5400.5 Sata Product Manual, Rev. B List of Figures Page Introduction About the Serial ATA interface Specification summary table Drive specificationsDrive specifications LBA mode Default logical geometryFormatted capacity Cylinders Read/write heads Sectors per track 16,383Drive specification Physical characteristicsPhysical organization Recording and interface technologyStart/stop times Seek timeTypical seek times Typical seek times msec ReadPower specifications Deferred spinup Typical current profileConducted noise Voltage toleranceEnvironmental specifications Wet bulb temperature Temperature gradientHumidity Relative humidity AltitudeOperating shock ShockNonoperating shock VibrationAcoustics Drive A-weighted Sound Power Levels SWL, BAElectromagnetic immunity Test for Prominent Discrete Tones PDTsSafety certification Free Fall Protection featureReliability Agency certificationAustralian C-Tick N176 Korean RRLFCC verification European Union Restriction of Hazardous Substances RoHS Environmental protectionChina Restriction of Hazardous Substances RoHS Directive Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveTop cover stiffness/deflection Drive mountingMomentus 5400.5 Sata Product Manual, Rev. B Signal Serial ATA connector pin definitionsSerial ATA Sata interface Segment Pin Function DefinitionP10 Ground 2nd mate P11 Reserved Pin Function DefinitionCommand name Command code in hex ATA-standard commands Supported ATA commandsCommand name Command code in hex Momentus 5400.5 Sata Product Manual, Rev. B Word Description Value Identify Device commandXx7FH Bit Word Description if bit is set to Bit WordSet Features command values Set Features commandAAH A.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Momentus 5400.5 Sata Product Manual, Rev. B Internet Seagate Technology support servicesPresales Support Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index ITE Sata Momentus 5400.5 Sata Product Manual, Rev. B Page Seagate Technology LLC

ST9120310ASG, ST9250320AS, ST9120310AS, ST980310AS, ST9160310ASG specifications

The Seagate ST980310ASG, ST9320320AS, ST9200321AS, and ST9160310AS models are part of Seagate's well-regarded line of hard disk drives (HDDs), known for their reliable performance and technological advancements in data storage. These drives feature several key characteristics that make them suitable for various applications, ranging from personal computing to enterprise environments.

The ST980310ASG is a 2.5-inch SATA hard drive with a storage capacity of 80GB. It operates at a speed of 5400 RPM, providing a balance between performance and power efficiency. The drive employs a 16MB cache, which helps enhance data access speeds, making it ideal for everyday computing tasks. Its low power consumption makes it a great choice for laptops or devices requiring energy efficiency.

The ST9320320AS, on the other hand, is a larger 320GB HDD that also benefits from a 2.5-inch form factor. This model runs at 7200 RPM, resulting in faster read and write speeds compared to its lower-RPM counterparts. With an 8MB cache, it is well-suited for applications demanding higher performance, such as gaming and multimedia storage. The ST9320320AS utilizes the SATA interface, providing wide compatibility and ease of integration into various systems.

Moving to the ST9200321AS, this 250GB drive is another 2.5-inch SATA option that emphasizes speed and efficiency. It operates at 5400 RPM and features an 8MB cache. This model is particularly appealing for users seeking an optimal mix of storage capacity and performance for standard computing tasks and moderate data access demands.

Lastly, the ST9160310AS and ST9160310ASG models offer storage capacities of 160GB. Both drives operate at 7200 RPM, ensuring quicker data access and transfer rates. The ST9160310ASG variant addresses specific needs for enhanced performance, often targeting gaming applications and high-performance computing systems. Superbly engineered, these drives include features like advanced error recovery controls, thermal monitoring, and data protection technologies that enhance reliability.

Collectively, these Seagate HDDs encompass diverse storage solutions characterized by their efficient performance, varying capacities, and advanced technologies tailored to meet the needs of different users. Whether for casual use, gaming, or enterprise applications, the ST980310ASG, ST9320320AS, ST9200321AS, and ST9160310AS models remain trusted choices in the realm of computer storage.
Top Page Image Contents