Seagate ST9250320AS, ST980310ASG manual Pin Function Definition, P10 Ground 2nd mate P11 Reserved

Page 30

Table 7:

Serial ATA connector pin definitions

 

 

 

 

Segment

Pin

Function

Definition

 

 

 

 

 

P1

V33

3.3V power

 

P2

V33

3.3V power

 

P3

V33

3.3V power, pre-charge, 2nd mate

 

P4

Ground

1st mate

 

 

 

 

 

P5

Ground

2nd mate

 

 

 

 

 

P6

Ground

2nd mate

 

 

 

 

 

P7

V5

5V power, pre-charge, 2nd mate

 

 

 

 

Power

P8

V5

5V power

 

 

 

P9

V5

5V power

 

 

 

 

 

 

P10

Ground

2nd mate

 

 

 

 

 

P11

Reserved

The pin corresponding to P11 in the backplane receptacle connector is also reserved

 

 

 

The corresponding pin to be mated with P11 in the power cable receptacle connector

 

 

 

shall always be grounded

 

 

 

 

 

P12

Ground

1st mate.

 

 

 

 

 

P13

V12

12V power, pre-charge, 2nd mate

 

P14

V12

12V power

 

P15

V12

12V power

Notes:

1.All pins are in a single row, with a 1.27 mm (0.050”) pitch.

2.The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mating sequences are:

the ground pins P4 and P12.

the pre-charge power pins and the other ground pins.

the signal pins and the rest of the power pins.

3.There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed in a blind-mate backplane configuration.

4.All used voltage pins (Vx) must be terminated.

22

Momentus 5400.5 SATA Product Manual, Rev. B

Image 30
Contents Momentus 5400.5 Sata Page Momentus 5400.5 Sata Product Manual, Rev. B Momentus 5400.5 Sata Product Manual, Rev. B Contents Momentus 5400.5 Sata Product Manual, Rev. B List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summary tableDrive specifications Formatted capacity Default logical geometryLBA mode Cylinders Read/write heads Sectors per track 16,383Physical organization Physical characteristicsDrive specification Recording and interface technologyTypical seek times Seek timeStart/stop times Typical seek times msec ReadPower specifications Conducted noise Typical current profileDeferred spinup Voltage toleranceEnvironmental specifications Humidity Relative humidity Temperature gradientWet bulb temperature AltitudeNonoperating shock ShockOperating shock VibrationElectromagnetic immunity Drive A-weighted Sound Power Levels SWL, BAAcoustics Test for Prominent Discrete Tones PDTsReliability Free Fall Protection featureSafety certification Agency certificationKorean RRL Australian C-Tick N176FCC verification Environmental protection European Union Restriction of Hazardous Substances RoHSChina Restriction of Hazardous Substances RoHS Directive Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsDrive mounting Top cover stiffness/deflectionMomentus 5400.5 Sata Product Manual, Rev. B Serial ATA Sata interface Serial ATA connector pin definitionsSignal Segment Pin Function DefinitionPin Function Definition P10 Ground 2nd mate P11 ReservedSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex Momentus 5400.5 Sata Product Manual, Rev. B Identify Device command Word Description ValueXx7FH Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesAAH 3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Momentus 5400.5 Sata Product Manual, Rev. B Presales Support Seagate Technology support servicesInternet Technical SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index ITE Sata Momentus 5400.5 Sata Product Manual, Rev. B Page Seagate Technology LLC

ST9120310ASG, ST9250320AS, ST9120310AS, ST980310AS, ST9160310ASG specifications

The Seagate ST980310ASG, ST9320320AS, ST9200321AS, and ST9160310AS models are part of Seagate's well-regarded line of hard disk drives (HDDs), known for their reliable performance and technological advancements in data storage. These drives feature several key characteristics that make them suitable for various applications, ranging from personal computing to enterprise environments.

The ST980310ASG is a 2.5-inch SATA hard drive with a storage capacity of 80GB. It operates at a speed of 5400 RPM, providing a balance between performance and power efficiency. The drive employs a 16MB cache, which helps enhance data access speeds, making it ideal for everyday computing tasks. Its low power consumption makes it a great choice for laptops or devices requiring energy efficiency.

The ST9320320AS, on the other hand, is a larger 320GB HDD that also benefits from a 2.5-inch form factor. This model runs at 7200 RPM, resulting in faster read and write speeds compared to its lower-RPM counterparts. With an 8MB cache, it is well-suited for applications demanding higher performance, such as gaming and multimedia storage. The ST9320320AS utilizes the SATA interface, providing wide compatibility and ease of integration into various systems.

Moving to the ST9200321AS, this 250GB drive is another 2.5-inch SATA option that emphasizes speed and efficiency. It operates at 5400 RPM and features an 8MB cache. This model is particularly appealing for users seeking an optimal mix of storage capacity and performance for standard computing tasks and moderate data access demands.

Lastly, the ST9160310AS and ST9160310ASG models offer storage capacities of 160GB. Both drives operate at 7200 RPM, ensuring quicker data access and transfer rates. The ST9160310ASG variant addresses specific needs for enhanced performance, often targeting gaming applications and high-performance computing systems. Superbly engineered, these drives include features like advanced error recovery controls, thermal monitoring, and data protection technologies that enhance reliability.

Collectively, these Seagate HDDs encompass diverse storage solutions characterized by their efficient performance, varying capacities, and advanced technologies tailored to meet the needs of different users. Whether for casual use, gaming, or enterprise applications, the ST980310ASG, ST9320320AS, ST9200321AS, and ST9160310AS models remain trusted choices in the realm of computer storage.