Seagate ST9250320AS, ST980310ASG 3 S.M.A.R.T. commands, Code in features register A.R.T. command

Page 39

4.3.3S.M.A.R.T. commands

S.M.A.R.T. provides near-term failure prediction for disc drives. When S.M.A.R.T. is enabled, the drive moni- tors predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is likely, S.M.A.R.T. makes a status report available to the host. Not all failures are predictable. S.M.A.R.T. predictability is limited to the attributes the drive can monitor. For more information on S.M.A.R.T. commands and implementation, see the Draft ATA-8 Standard.

SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4H) that elimi- nates unnecessary drive returns. The diagnostic software ships with all new drives and is also available at: http://seatools.seagate.com.

This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T. to enable this feature. The table below shows the S.M.A.R.T. command codes that the drive uses.

Table 9:

S.M.A.R.T. commands

 

 

Code in features register

S.M.A.R.T. command

 

 

 

D0H

 

S.M.A.R.T. Read Data

 

 

 

D1H

 

Vendor-specific

 

 

 

D2H

 

S.M.A.R.T. Enable/Disable Attribute Autosave

 

 

 

D3H

 

S.M.A.R.T. Save Attribute Values

 

 

 

D4H

 

S.M.A.R.T. Execute Off-line Immediate (runs DST)

 

 

 

D5H

 

S.M.A.R.T. Read Log Sector

 

 

 

D6H

 

S.M.A.R.T. Write Log Sector

 

 

 

D7H

 

Vendor-specific

 

 

 

D8H

 

S.M.A.R.T. Enable Operations

 

 

 

D9H

 

S.M.A.R.T. Disable Operations

 

 

 

DAH

 

S.M.A.R.T. Return Status

 

 

 

Note. If an appropriate code is not written to the Features Register, the command is aborted and 0x04 (abort) is written to the Error register.

Momentus 5400.5 SATA Product Manual, Rev. B

31

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Momentus 5400.5 Sata Page Momentus 5400.5 Sata Product Manual, Rev. B Momentus 5400.5 Sata Product Manual, Rev. B Contents Momentus 5400.5 Sata Product Manual, Rev. B List of Figures Page Introduction About the Serial ATA interface Specification summary table Drive specificationsDrive specifications Cylinders Read/write heads Sectors per track 16,383 Default logical geometryLBA mode Formatted capacityRecording and interface technology Physical characteristicsDrive specification Physical organizationTypical seek times msec Read Seek timeStart/stop times Typical seek timesPower specifications Voltage tolerance Typical current profileDeferred spinup Conducted noiseEnvironmental specifications Altitude Temperature gradientWet bulb temperature Humidity Relative humidityVibration ShockOperating shock Nonoperating shockTest for Prominent Discrete Tones PDTs Drive A-weighted Sound Power Levels SWL, BAAcoustics Electromagnetic immunityAgency certification Free Fall Protection featureSafety certification ReliabilityKorean RRL Australian C-Tick N176FCC verification Environmental protection European Union Restriction of Hazardous Substances RoHSChina Restriction of Hazardous Substances RoHS Directive Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveTop cover stiffness/deflection Drive mountingMomentus 5400.5 Sata Product Manual, Rev. B Segment Pin Function Definition Serial ATA connector pin definitionsSignal Serial ATA Sata interfaceP10 Ground 2nd mate P11 Reserved Pin Function DefinitionCommand name Command code in hex ATA-standard commands Supported ATA commandsCommand name Command code in hex Momentus 5400.5 Sata Product Manual, Rev. B Word Description Value Identify Device commandXx7FH Bit Word Description if bit is set to Bit WordSet Features command values Set Features commandAAH 3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Momentus 5400.5 Sata Product Manual, Rev. B Technical Support Seagate Technology support servicesInternet Presales SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index ITE Sata Momentus 5400.5 Sata Product Manual, Rev. B Page Seagate Technology LLC

ST9120310ASG, ST9250320AS, ST9120310AS, ST980310AS, ST9160310ASG specifications

The Seagate ST980310ASG, ST9320320AS, ST9200321AS, and ST9160310AS models are part of Seagate's well-regarded line of hard disk drives (HDDs), known for their reliable performance and technological advancements in data storage. These drives feature several key characteristics that make them suitable for various applications, ranging from personal computing to enterprise environments.

The ST980310ASG is a 2.5-inch SATA hard drive with a storage capacity of 80GB. It operates at a speed of 5400 RPM, providing a balance between performance and power efficiency. The drive employs a 16MB cache, which helps enhance data access speeds, making it ideal for everyday computing tasks. Its low power consumption makes it a great choice for laptops or devices requiring energy efficiency.

The ST9320320AS, on the other hand, is a larger 320GB HDD that also benefits from a 2.5-inch form factor. This model runs at 7200 RPM, resulting in faster read and write speeds compared to its lower-RPM counterparts. With an 8MB cache, it is well-suited for applications demanding higher performance, such as gaming and multimedia storage. The ST9320320AS utilizes the SATA interface, providing wide compatibility and ease of integration into various systems.

Moving to the ST9200321AS, this 250GB drive is another 2.5-inch SATA option that emphasizes speed and efficiency. It operates at 5400 RPM and features an 8MB cache. This model is particularly appealing for users seeking an optimal mix of storage capacity and performance for standard computing tasks and moderate data access demands.

Lastly, the ST9160310AS and ST9160310ASG models offer storage capacities of 160GB. Both drives operate at 7200 RPM, ensuring quicker data access and transfer rates. The ST9160310ASG variant addresses specific needs for enhanced performance, often targeting gaming applications and high-performance computing systems. Superbly engineered, these drives include features like advanced error recovery controls, thermal monitoring, and data protection technologies that enhance reliability.

Collectively, these Seagate HDDs encompass diverse storage solutions characterized by their efficient performance, varying capacities, and advanced technologies tailored to meet the needs of different users. Whether for casual use, gaming, or enterprise applications, the ST980310ASG, ST9320320AS, ST9200321AS, and ST9160310AS models remain trusted choices in the realm of computer storage.
Top Page Image Contents