Seagate ST150176LW/LC manual Drive formatting

Page 41

Barracuda 50 Installation Guide, Rev. A

39

the drive you want to partition. Make sure that your new drive is selected. If you accidently repartition your old hard drive, you will arase all data on the drive.

d.Press 1 to select “Create DOS partition or logical DOS drive” and then press the ENTER key.

e.Press 1 again to select “Create primary DOS partition” and then press the ENTER key. Create your first drive partition.

If you are creating a partition that will be used to boot your computer (drive C:), make sure that the partition is marked active.

f.Create an extended partition and additional logical drives, if necessary, until all the space on your new hard drive has been partioned.

g.When the partitioning is complete, fdisk reboots your computer.

Drive formatting

a.At the A: prompt, type format x where x is the letter of your new partition. If this is your boot drive, type format

x:/s. Make sure you use the correct drive letter. If you format a drive that already contains data, you will erase all data on the drive.

b.Repeat this process for all the new partitions you have created.

After you format your new drive, it is ready to use. You’re done!

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Barracuda Disc Drive Contents Preface Electrostatic discharge protection Handling precautionsImportant safety information and precautions Barracuda 50 Installation Guide, Rev. a Wichtige Sicherheitshinweise Barracuda 50 Installation Guide, Rev. a Barracuda 50 Installation Guide, Rev. a Electromagnetic compliance Regulatory agency complianceElectromagnetic susceptibility Australian C-Tick Electromagnetic compliance for the European UnionGeneral description Primary benefits of LVD technology Single-ended and low voltage differential modesProviding adequate cooling SE and LVD bus configurationsData bus widths Kühlung des Systems Suggested air flow Characteristics ST150176LW/LC +12 Set the Scsi ID on the drive ST150176LW installationSetting the Scsi ID on ST150176LW drives Configure termination Scsi bus termination Setting terminator power jumpers Configure termination powerConnect the drive activity remote LED optional Drive Active LED indicator connectionsParity Check option Delay Motor Start and Motor Start optionsWrite Protect option Additional jumper options Format the drive Mount the drive in the host system and connect cablingConnecting cables to the drive Multiple-drive connection to host adapter Mounting configuration dimensions LW model Alternate Scsi ID select and LED connection Additional connector on ST150176LW drivesScsi ID ST150176LC installationSetting the Scsi ID on ST150176LC drives Configure termination Delay Motor Start and Motor Start options Additional jumper options Pin I/O connection to drive LC model Mount the drive in the host systemMounting configuration dimensions LC model Important information about formatting the drive System preparation DOS, Windows 3.1, Windows 95, and WindowsDrive formatting Macintosh Seagate Technology support services Presales Support Customer Service CSO European Support Services Africa/Middle East Support Services SeaFAX Page Page

ST150176LW/LC specifications

The Seagate ST150176LW/LC is a high-capacity hard disk drive that exemplifies reliability and performance in data storage technology. Designed primarily for enterprise environments, this drive offers a robust solution for businesses requiring efficient data management, backup, and storage solutions.

One of the standout features of the Seagate ST150176LW/LC is its impressive capacity of 1.5TB. This substantial storage allows for the management of large volumes of data, making it ideal for organizations that handle extensive databases, multimedia files, and other data-intensive applications. The drive is equipped with a 7200 RPM spindle speed, ensuring rapid data access and faster read/write operations, which is critical for maintaining high performance in data-intensive workflows.

The ST150176LW/LC incorporates Advanced Format Technology, which optimizes the sector size to increase data accuracy and storage efficiency. This technology enables better alignment of data structures on the magnetic media, contributing to enhanced performance and capacity utilization. Additionally, the drive is designed with a SATA interface that supports data transfer rates of up to 6 Gbps, allowing seamless integration with modern systems.

Reliability is a cornerstone of the Seagate ST150176LW/LC drive’s design. It features enhanced integrity technologies, ensuring protection against data corruption and hardware errors. The drive also supports error correction algorithms that proactively address potential issues, leading to reduced downtime and improved data integrity for mission-critical applications. With an MTBF (Mean Time Between Failures) rating that underscores its durability, it is well-suited for continuous operation in demanding environments.

Furthermore, the ST150176LW/LC is built with power efficiency in mind, featuring optimized power management features that contribute to lower energy consumption. This not only helps in reducing operational costs but also aligns with the growing push towards sustainability in data management practices.

In summary, the Seagate ST150176LW/LC hard disk drive combines high capacity, exceptional performance, and reliable data integrity in a single device, making it a preferred choice for enterprises looking to enhance their data storage capabilities. Its advanced technologies and robust characteristics drive efficiency and provide businesses with the dependable storage solutions they require.
Top Page Image Contents