Seagate Official Manual and Specifications for ST3320413CS HDD

Page 13

Drive specification	ST3500414CS	ST3500312CS	ST3320413CS	ST3320311CS

Operational Shock (max.)	70 Gs at 2ms

Non-Operational Shock (max.)	350 Gs at 2ms

Vibration, operating	5Hz to 22Hz: 0.25 Gs
	22Hz to 350Hz: 0.50 Gs
	350Hz to 500Hz: 0.25 Gs

Vibration, non-operating	5Hz to 350 Hz: 3.0 Gs
	350Hz to 500Hz: 3.0 Gs
Drive acoustics, sound power
Idle**	1.9 bels (typical)
	2.1 bels (max.)
CE Seek Profile	2.3 bels (typical)
	2.4 bels (max.)
Nonrecoverable read errors	1 per 1015 bits read
Annualized Failure Rate (AFR)	0.55%

Warranty	To determine the warranty for a specific drive, use a web browser to access the following web
	page: support.seagate.com/customer/warranty_validation.jsp
	From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive
	serial number, model number (or part number) and country of purchase. The system will dis-
	play the warranty information for your drive.
Contact start-stop cycles	50,000 at 25°C, 50% rel. humidity

Supports Hotplug operation per the	Yes
Serial ATA Revision 2.6 specification

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

Video 3.5 HDD Product Manual, Rev. J

7

Image 13

Contents Video 3.5 HDD Revision Date Sheets affected or comments Revision historyPipeline HD.2 Series Sata Product Manual, Rev. J Pipeline HD.2 Series Sata Product Manual, Rev. J Contents Pipeline HD.2 Series Sata Product Manual, Rev. J Introduction About the Serial ATA interface Specification summary tables Drive specificationsDrive specification ST31000424CS ST31000322CS Drive specifications summary for 1000GB modelsVideo 3.5 HDD Product Manual, Rev. J Drive specifications summary for 500 and 320GB models Video 3.5 HDD Product Manual, Rev. J Drive specification ST3250412CS ST3250312CS ST3160316CS Drive specifications summary for 250 and 160GB modelsVideo 3.5 HDD Product Manual, Rev. J LBA mode Default logical geometryFormatted capacity Recording and interface technologySeek time Physical characteristicsStart/stop times Power specifications Conducted noise Typical current profilesVoltage tolerance Active mode Power management modesIdle mode Sleep modeEnvironmental specifications Operating shock ShockNon-operating shock VibrationAcoustics emissions Drive A-weighted Sound Power Levels SWL, BAElectromagnetic immunity Test for Prominent Discrete Tones PDTsReliability Safety certificationAgency certification Annualized Failure Rate AFRAustralian C-Tick N176 Korean RRLFCC verification Corrosive environment Environmental protectionChina Restriction of Hazardous Substances RoHS Directive Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions for 1000GB modelsMounting dimensions for 500, 320, 250 and 160GB models Hot-Plug compatibility Serial ATA Sata interfaceSerial ATA connector pin definitions Serial ATA device plug connector pin definitionsSignal Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F3H Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordIdle Immediate command with Iunload faeture is supported Set Features command values Set Features commandM.A.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Seagate Technology support services Data Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index RRL Page Video 3.5 HDD Product Manual, Rev. J Page Seagate Technology LLC

Related manuals

Manual 50 pages 5.86 Kb