Drive specification | ST920813AM |
| ST920814AM |
(OEM) |
| (Aftermarket) | |
|
| ||
|
|
|
|
Wet bulb temperature | 40°C (operating, max) |
| |
| 40°C (nonoperating, max) | ||
|
| ||
Altitude, operating (at 25°C) | |||
| For higher temperature capabilities, See “Temperature vs. altitude capability” | ||
| on page 15. |
| |
|
| ||
Altitude, nonoperating (below mean sea level, max) | |||
|
|
|
|
Shock, operating |
|
|
|
at 2 msec | 200 Gs max |
| |
at 11 msec | 110 Gs max |
| |
|
|
|
|
Shock, nonoperating |
|
|
|
at 2 msec | 800 Gs max |
| |
at 1 msec | 800 Gs max |
| |
at 0.5 msec | 400 Gs max |
| |
|
|
| |
Vibration, operating | 2.0 G (10 - 200 Hz) |
| |
(max displacement may apply below 10 hz) | 1.0 G (200 - 500 Hz) |
| |
|
| ||
Vibration, nonoperating | 5.0 Gs (0 to peak, | ||
(max displacement may apply below 22 hz) |
|
|
|
|
|
|
|
Drive acoustics, sound power |
|
|
|
Idle** | 2.3 Bels (typical) |
| |
| 2.5 Bels (max) |
| |
Normal seek | 2.5 Bels (typical) |
| |
| 2.7 Bels (max) |
| |
Performance seek | 2.8 Bels (typical) |
| |
| 3.0 Bels (max) |
| |
|
|
| |
Nonrecoverable read errors | 1 per 1014 bits read |
| |
Mean Time Before Failure (MTBF) | 550,000 | ||
| At 8,760 POH (Power On Hours) per year | ||
| Max case temperature: 70°C at the case measurement location shown in | ||
| Figure 3. |
| |
|
|
|
|
Load/Unload (U/UL) cycles |
|
|
|
25°C, 50% relative humidity | 600,000 | ||
| 30,000 hard power on/off cycles | ||
32°C, 80% relative humidity | 600,000 | ||
5°C, 80% relative humidity | 30,000 hard power on/off cycles | ||
5°C, 10% relative humidity |
|
|
|
60°C, 20% relative humidity |
|
|
|
|
| ||
Service life | 10 years (form, fit, and function replacement) | ||
|
| ||
Warranty | 1 year standard (up to 5 years max with additional warranty purchase). | ||
| To determine the warranty for a specific drive, use a web browser to access the | ||
| following web page: |
| |
| www.seagate.com/support/service/ | ||
| From this page, click on the “Verify Your Warranty” link. You will be asked to | ||
| provide the drive serial number, model number (or part number) and country of | ||
| purchase. The system will display the warranty information for your drive. | ||
|
|
|
|
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
**During periods of drive idle, some offline activity may occur, according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.
***Typical host systems will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby modes will not contribute to battery power consumption.
EE25 Series Product Manual, Rev. E | 7 |