Seagate ST940813AM, ST940814AM, ST930814AM, ST930813AM, ST920813AM, ST920814AM Agency certification

Page 24

2.15Agency certification

2.15.1Safety certification

The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections of IEC950 and EN 60950 as tested by TUV North America.

2.15.2Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec- tromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

Korean RRL

If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with para- graph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibil- ity (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recog- nized lab.

•EUT name: EE25 Series

•Certificate numbers:STX-EE251 (B)

•Trade name or applicant: Seagate Technology International

•Manufacturing date: March 2006

•Manufacturer/nationality: Seagate Technology International

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communi- cation Authority (ACA).

2.15.3FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually mar- keted to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.

Seagate Technology LLC has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disc drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interference to radio and television reception.

18

EE25 Series Product Manual, Rev. E

Page 23 Page 25
Image 24
Page 23 Page 25
Contents EE25 Series Page Contents EE25 Series Product Manual, Rev. E List of Figures EE25 Series Product Manual, Rev. E Introduction EE25 Series Product Manual, Rev. E Drive specifications Specification summarySpecifications for 40 and 30 Gbyte models AftermarketVibration, nonoperating Specifications for 20 Gbyte models Drive specification ST920813AM ST920814AMEE25 Series Product Manual, Rev. E Default logical geometry LBA modeFormatted capacity Physical organizationPhysical characteristics Technology SpecificationRecording and interface technology Seek timeRead seek times vs temperature 85C 25C 20C 30C Start/stop timesMsec Typical Max 85C 25C 20C 30CPower specifications Typical current profile Conducted noiseVoltage tolerance Power-management modes Active modeIdle mode Sleep modeEnvironmental specifications AltitudeShock Operating shockNonoperating shock Acoustic mode Idle Normal Seek Performance Seek AcousticsVibration Operating vibrationMeasurement type Specification Electromagnetic immunityReliability Test Description Performance Reference Level StandardAgency certification Environmental protection Corrosive environmentEuropean Union Restriction of Hazardous Substances RoHS Page Configuring and mounting the drive Handling and static discharge precautionsJumper settings Master/slave configurationDrive mounting Cable-select optionATA interface signals and connector pins Signal Name Connector Cable Contact ConductorCable Connector Signal Name Conductor Contact ATA interfaceSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard power-management commandsATA-standard security commands Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command 0CHEE25 Series Product Manual, Rev. E Seagate Technology support services InternetPresales Support Technical SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index NumericsPage Page EE25 Series Product Manual, Rev. E Page Seagate Technology LLC
Top Page Image Contents