Seagate 5400.3 SATA manual Environmental specifications

Page 16

2.10Environmental specifications

Note. The removable drive cartridge should be stored for less than 60 days when exposed to continuous maximum temperature and humidity conditions of 40°C (104°F) and 80% relative humidity. Exceed- ing this duration in these conditions may result in loss of data.

2.10.1Ambient temperature

Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 65°C (149°F) within the operating ambient conditions.

Above 1,000 feet (305 meters), the maximum temperature is derated linearly by 1°C every 1000 feet.

Operating

5° to 55°C (41° to 131°F)

 

 

Nonoperating

–40° to 70°C (–40° to 158°F)

 

 

System storage

0° to 30°C (0° to 86°F)

 

 

Drive cartridge storage

0° to 30°C (0° to 86°F)

 

 

2.10.2Temperature gradient

Operating

20°C per hour (68°F per hour max), without condensation

 

 

Nonoperating

30°C per hour (86°F per hour max), without condensation

 

 

2.10.3Humidity

Refer to the following two sections for relative humitidy and wet bulb temperature specifications.

2.10.3.1Relative humidity

Operating

5% to 90% noncondensing (30% per hour max)

 

 

Nonoperating

5% to 95% noncondensing (30% per hour max)

 

 

Drive cartridge storage

20% to 40% noncondensing (30% per hour max)

 

 

2.10.3.2Wet bulb temperature

Operating

30°C (86°F) max

 

 

Nonoperating

40°C (104°F) max

 

 

Drive cartridge storage

25°C (77°F) max

 

 

2.10.4

Altitude

 

 

 

 

 

Operating

–304.8 m to 3,048 m (–1,000 ft to 10,000+ ft)

 

 

 

 

Nonoperating

–304.8 m to 12,192 m (–1,000 ft to 40,000+ ft)

 

 

 

10

Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D

Image 16
Contents Momentus 5400.3 Sata Removable Drive Cartridge 160 GBPage Contents Page List of Figures Page Introduction Momentus 5400.3 Sata Removable Drive CartridgeAbout the Serial ATA interface Removable Drive Cartridge specifications Specification summaryBer or part number and country of purchase. The system Default logical geometry LBA modeFormatted capacity Physical organizationPhysical characteristics Seek timeStart/stop times Typical seek times msec Read WritePower specifications Conducted noise Voltage tolerancePower-management modes Active modeIdle mode Sleep modeEnvironmental specifications Shock Acoustics Electromagnetic immunityIdle Seek Test Description Performance level Reference standardSafety certification Measurement type SpecificationReliability Environmental protectionRoHS MCV Using the drive Handling precautionsDimensions Normal operationWrite protect switch Insertion capabilityPage Serial ATA connector pin definitions SignalSerial ATA Sata interface Segment Pin Function DefinitionPin Function Definition P10 Ground 2nd mate P11 ReservedSupported ATA commands Supported ATA commandsCommand name Command code in hex ATA-standard commands Command name Command code in hex Supported ATA commands Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Seagate Technology support services InternetPresales Support Technical SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index RPM TMR TPI Page Page Seagate Technology LLC