Shock | Seagate 5400.3 SATA specification

2.11Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis.

2.11.0.1Operating shock

These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 250 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more than two times per second.

2.11.0.2Nonoperating shock

The nonoperating shock level that the RDC can experience without incurring physical damage or degradation in performance when subsequently put into operation is 1,500 Gs based on a nonrepetitive half-sine shock pulse of 0.5 msec duration. This value should be considered equivalent to a 1 M drop to any surface or corner of the RDC onto a tiled surface over concrete.

2.11.1Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the rig- idly-held RDC. Vibration may be applied in the X, Y or Z axis.

2.11.1.1Operating vibration

The maximum vibration levels that the drive may experience while meeting the performance standards speci- fied in this document are specified below.

5–500 Hz

0.5 G (0 to peak). Max displacement may apply below 10 Hz.

2.11.1.2Nonoperating vibration

The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degrada- tion in performance when subsequently put into operation are specified below.

Nonoperating random vibration input levels (no hard errors, all axes)

•2.22 Grms (5-500 Hz random), 30 min. each axis

•Frequency (Hz): 5-500; Slope (dB/Oct.): Power Spectral Density (PSD) (G2/Hz) +/- 6dB: 0.01

Momentus 5400.3 SATA Removable Drive Cartridge Product Manual, Rev. D