Seagate ST3400833SCE, ST3120213SCE, ST3160212SCE, ST3250824SCE manual Environmental specifications

Page 22

drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disc access is necessary.

2.9Environmental specifications

2.9.1Ambient temperature

Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 69°C (156°F) within the operating ambient conditions for standard models. Recommended measurement locations are shown in Figure 6.

Above 1,000 feet (305 meters), the maximum temperature is derated linearly to 44°C (112°F) at 10,000 feet (3,048 meters).

Operating:

0° to 60°C (32° to 140°F)

 

 

Nonoperating:

–40° to 70°C (–40° to 158°F)

 

 

2.9.2Temperature gradient

Operating:

20°C per hour (68°F per hour max), without condensation

 

 

Nonoperating:

30°C per hour (86°F per hour max)

 

 

2.9.3Humidity

2.9.3.1Relative humidity

Operating:

5% to 90% noncondensing (30% per hour max)

 

 

Nonoperating:

5% to 95% noncondensing (30% per hour max)

 

 

2.9.3.2Wet bulb temperature

Operating:

37.7°C (99.9°F max)

 

 

Nonoperating:

40°C (104°F max)

 

 

2.9.4Altitude

Operating:

–60.96 m to 3,048 m (–200 ft. to 10,000+ ft.)

 

 

Nonoperating:

–60.96 m to 12,192 m (–200 ft. to 40,000+ ft.)

 

 

2.9.5Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis.

2.9.5.1Operating shock

These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 63 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more than two times per second.

16

DB35.2 Serial ATA Product Manual, Rev. C

Image 22
Contents DB35.2 Serial ATA Page Contents DB35.2 Serial ATA Product Manual, Rev. C List of Figures Page Introduction About the Serial ATA interface Drive specifications Specification summariesDrive specifications for 500 and 400 Gbyte models Drive specification ST3500841SCE ST3400833SCEBe asked to provide the drive serial number, model number or Drive specifications for 300, 250 and 200 Gbyte models Drive specification ST3300822SCE ST3250824SCE ST3200827SCEDrive specifications for 300, 250 and 200 Gbyte models Drive specifications for 160, 120, and 80 Gbyte models Drive specification ST3160212SCE ST3120213SCE ST3802110SCEDrive specifications for 160, 120, and 80 Gbyte models Formatted capacity Default logical geometryLBA mode Recording and interface technologyDB35.2 Serial ATA Product Manual, Rev. C Seek time Physical characteristicsDrive specification Typical seek times msec Read WritePower specifications Start/stop timesDC power requirements Typical current profilesIdle mode Power-management modesActive mode Sleep modeEnvironmental specifications Vibration AcousticsNonoperating shock Operating vibrationRadio frequency environments Electromagnetic immunityReliability Performance Reference Test Description Level StandardElectromagnetic compatibility Safety certificationAgency certification Korean RRLFCC verification Environmental protectionAustralian C-Tick N176 European Union Restriction of Hazardous Substances RoHSCorrosive environment DB35.2 Serial ATA Product Manual, Rev. C Configuring and mounting the drive Handling and static-discharge precautionsBreather filter hole precautions Breather filter hole locationConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingSerial ATA Sata interface Hot-Plug compatibilitySignal Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command DB35.2 Serial ATA Product Manual, Rev. C Presales Support InternetTechnical Support Data Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index Pcba Sata Page Page Seagate Technology LLC