Seagate ST3802110SCE, ST3120213SCE manual Drive specifications for 300, 250 and 200 Gbyte models

Table 2:	Drive specifications for 300, 250 and 200 Gbyte models
Drive specification		ST3300822SCE	ST3250824SCE	ST3200827SCE
Altitude, nonoperating		–60.96 m to 12,192 m
(meters below mean sea level, max)		(–200 ft to 40,000+ ft)
Shock, operating (max at 2 msec)		63 Gs
Shock, nonoperating (max at 2 msec)		350 Gs
Vibration, operating		5-22 Hz: +/-0.25”, Displacement limited
		22-350 Hz: 0.5 Gs
		350-500 Hz: 0.25 Gs
Vibration, nonoperating		5-22 Hz: +/-0.25”, Displacement limited
		22-350 Hz: 5.0 Gs
		350-500 Hz: 1.0 Gs
Drive acoustics, sound power (bels)
Idle** (bels)		2.67 (typical)
		2.82 (max)
Operational, CE seeks (bels)		2.80 (typical)
		2.90 (max)
Operational, PVR seeks (bels)		2.68 (typical)
		2.80 (max)
Nonrecoverable read errors		1 per 1014 bits read
Annualized Failure Rate (AFR)		0.70%
Warranty		5 years on distribution units.
		To determine the warranty for a specific drive, use a web browser to access
		the following web page:
		www.seagate.com/support/service/
		From this page, click on the “Verify Your Warranty” link. You will be asked
		to provide the drive serial number, model number (or part number) and
		country of purchase. The system will display the warranty information for
		your drive.
Contact start-stop cycles		50,000
(25°C, 50% relative humidity)
Supports hotplug operation per Serial ATA Revision 2.5		Yes
specification

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

DB35.2 Serial ATA Product Manual, Rev. C 7