Seagate ST750LX003, 100665905, ST500LX003 manual Drive specifications, Specification summary table

3.0Drive specifications

Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power.

3.1Specification summary table

The specifications listed in this table are for quick reference. For details on specification measurement or defi- nition, see the appropriate section of this manual.

Table 1:	Drive specifications
Drive specification		ST750LX003	ST500LX003
Formatted GB (512 bytes/sector)*		750	500
Guaranteed sectors		1,465,149,168	976,773,168
Bytes per sector		4K emulation @ 512
Physical read/write heads		4
Discs		2
Cache (MB)		32
Recording density in BPI (bits/in max)		1778k
Track density TPI (tracks/in max)		317k
Areal density (Gb/in2 max)		563.6
Spindle speed (RPM)		7200
Average latency (ms)		4.20
Internal transfer rate (Gb/s max)		1.23
I/O data transfer rate (Gb/s max)		6.0
ATA data-transfer modes supported		SATA 1.0, Serial ATA Revision 2.6
		PIO modes 0–4
		Multiword DMA modes 0–2
		Ultra DMA modes 0–6
Height (max)		9.5 ± 0.2 mm (0.370 ± .008 in)
Width (max)		69.85 ± 0.25 mm (2.750 ± 0.010 in)
Length (max)		100.30 ± 0.25 mm (3.949 ± 0.010 in)
Weight (max)		115 g (0.253 lb)
Power-on to ready (sec typical)		5.0
Standby to ready (sec typical)		3.5
Track-to-track seek time, read (msec typical)		1.5
Average seek, read (ms typical)		11.0
Average seek, write (ms typical)		13.0
Startup current, +5V amps (max)		1.2
Read power (watts typical)		3.3

4 Momentus XT Product Manual, Rev. D