Seagate ST750LX003, 100665905, ST500LX003 Set Features command values, 3 S.M.A.R.T. commands

Page 34

5.3.2Set Features command

This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an inter- rupt. If the value in the register does not represent a feature that the drive supports, the command is aborted. Power-on default has the read look-ahead and write caching features enabled. The acceptable values for the Features register are defined as follows:

Table 8: Set Features command values

02H

Enable write cache (default).

03H

Set transfer mode (based on value in Sector Count register).

 

Sector Count register values:

 

00H

Set PIO mode to default (PIO mode 2).

 

01H

Set PIO mode to default and disable IORDY (PIO mode 2).

 

08H

PIO mode 0

 

09H

PIO mode 1

 

0AH

PIO mode 2

 

0BH

PIO mode 3

 

0CH

PIO mode 4 (default)

 

20H

Multiword DMA mode 0

 

21H

Multiword DMA mode 1

 

22H

Multiword DMA mode 2

 

40H

Ultra DMA mode 0

 

41H

Ultra DMA mode 1

 

42H

Ultra DMA mode 2

 

43H

Ultra DMA mode 3

 

44H

Ultra DMA mode 4

 

45H

Ultra DMA mode 5

 

46H

Ultra DMA mode 6

55H

Disable read look-ahead (read cache) feature.

82H

Disable write cache

AAH

Enable read look-ahead (read cache) feature (default).

F1H

Report full capacity available

Note. At power-on, or after a hardware or software reset, the default values of the features are as indi- cated above.

5.3.3S.M.A.R.T. commands

S.M.A.R.T. provides near-term failure prediction for disc drives. When S.M.A.R.T. is enabled, the drive moni- tors predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines that a failure is likely, S.M.A.R.T. makes a status report available to the host. Not all failures are predictable. S.M.A.R.T. predictability is limited to the attributes the drive can monitor. For more information on S.M.A.R.T. commands and implementation, see the Draft ATA-8 Standard.

28

Momentus XT Product Manual, Rev. D

Image 34
Contents Momentus XT ST750LX003ST500LX003Revision history Revision Date Sheets affected or commentsContents Momentus XT Product Manual, Rev. D List of Figures Page Seagate Technology support services Seagate Online Support and ServicesIntroduction About the Serial ATA interface Drive specifications Specification summary tableTem will display the warranty information for your drive Specifics of the Solid State Hybrid Feature LBA modeSolid State Hybrid feature Formatted capacityPhysical organization Default logical geometryPhysical characteristics Recording and interface technologySeek time Power specificationsStart/stop times DC power Idle mode powerStandby mode Power dissipation +5V input average 25 CTypical current profile Typical +5V only startup and operation current profileActive mode Power-management modesPower management modes Idle modeEnvironmental specifications Acoustics Reliability Measurement type SpecificationElectromagnetic immunity Radio frequency environmentsElectromagnetic compatibility Safety certificationAgency certification Korean BCCFCC verification Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS Corrosive environment China Restriction of Hazardous Substances RoHS DirectiveConfiguring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingSerial ATA Sata interface Hot-Plug compatibilitySignal Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions Pin Function DefinitionSupported ATA commands ATA-standard commands names Command code in hexATA-standard security commands Identify Device command Word Description ValueXx07H Description if bit is set to Bit Set Features command values Set Features command3 S.M.A.R.T. commands A.R.T. commands Code in features register A.R.T. commandMomentus XT Product Manual, Rev. D Index ITE TPI Momentus XT Product Manual, Rev. D Page Seagate Technology LLC Americas