Seagate 100665905, ST750LX003, ST500LX003 manual Idle mode power, Standby mode, DC power

Page 15

•Idle mode power

Idle mode power is measured with the drive up to speed, with servo electronics active and with the heads in a random track location.

•Standby mode

During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/ write electronics are in power-down model

Table 3:	DC power

Power dissipation		+5V input average (25° C)

Spinup (max)		1.2A

Read		3.3W

Write		3.2W

Idle, performance*		2.4W

Idle, active*		1.2W

Idle, low power mode*		1.1W

Standby		0.6W

Sleep		0.6W

*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

Momentus XT Product Manual, Rev. D

9

Image 15

Contents ST750LX003ST500LX003 Momentus XTRevision Date Sheets affected or comments Revision historyContents Momentus XT Product Manual, Rev. D List of Figures Page Seagate Online Support and Services Seagate Technology support servicesIntroduction About the Serial ATA interface Specification summary table Drive specificationsTem will display the warranty information for your drive Formatted capacity LBA modeSolid State Hybrid feature Specifics of the Solid State Hybrid FeatureRecording and interface technology Default logical geometryPhysical characteristics Physical organizationPower specifications Seek timeStart/stop times Power dissipation +5V input average 25 C Idle mode powerStandby mode DC powerTypical +5V only startup and operation current profile Typical current profileIdle mode Power-management modesPower management modes Active modeEnvironmental specifications Acoustics Radio frequency environments Measurement type SpecificationElectromagnetic immunity ReliabilityKorean BCC Safety certificationAgency certification Electromagnetic compatibilityEnvironmental protection FCC verificationEuropean Union Restriction of Hazardous Substances RoHS China Restriction of Hazardous Substances RoHS Directive Corrosive environmentHandling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions-top, side and end viewHot-Plug compatibility Serial ATA Sata interfacePin Function Definition Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions SignalATA-standard commands names Command code in hex Supported ATA commandsATA-standard security commands Word Description Value Identify Device commandXx07H Description if bit is set to Bit Set Features command Set Features command values3 S.M.A.R.T. commands Code in features register A.R.T. command A.R.T. commandsMomentus XT Product Manual, Rev. D Index ITE TPI Momentus XT Product Manual, Rev. D Page Americas Seagate Technology LLC