Seagate 100665905, ST750LX003, ST500LX003 Formatted capacity, LBA mode, Solid State Hybrid feature

Page 12

3.2Formatted capacity

Model

Formatted capacity*

Guaranteed sectors

Bytes per sector

 

 

 

 

ST750LX003

750GB

1,465,149,168

4K emulated @ 512

 

 

 

ST500LX003

500GB

976,773,168

 

 

 

 

 

*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

3.2.1LBA mode

When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1,where n is the number of guaranteed sectors as defined above.

See Section 5.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48- bit addressing support of drives with capacities over 137GB.

3.2.2Solid State Hybrid feature

The Solid State Hybrid feature utilizes the addition of NAND Flash memory to enhance the performance of the drive. Short random accesses to the NAND Flash are faster than disc accesses due to the elimination of seek and rotational latencies and therefore it is used to store more frequently accessed data. The Momentus XT uses a proprietary algorithm which monitors drive activity and determines the optimum data to maintain in the NAND Flash for peak responsiveness. The Solid State Hybrid feature is self contained in the drive firmware and functions independent of the host hardware or operating system. There are no special host system requirements. Momentus XT can be installed in any standard SATA environment and will automatically opti- mize.

Specifics of the Solid State Hybrid Feature:

Powerful ECC correction on data read from the NAND Flash.

Maintains a list of defective NAND Flash blocks and maps them out of use.

Additional bad blocks added during use will be added to the list of defective blocks and taken out of use.

Storage functionality is preserved with no data loss with any wear out of the NAND Flash.

No user intervention required.

6

Momentus XT Product Manual, Rev. D

Image 12
Contents Momentus XT ST750LX003ST500LX003Revision history Revision Date Sheets affected or commentsContents Momentus XT Product Manual, Rev. D List of Figures Page Seagate Technology support services Seagate Online Support and ServicesIntroduction About the Serial ATA interface Drive specifications Specification summary tableTem will display the warranty information for your drive LBA mode Solid State Hybrid featureSpecifics of the Solid State Hybrid Feature Formatted capacityDefault logical geometry Physical characteristicsPhysical organization Recording and interface technologyPower specifications Seek timeStart/stop times Idle mode power Standby modeDC power Power dissipation +5V input average 25 CTypical current profile Typical +5V only startup and operation current profilePower-management modes Power management modesActive mode Idle modeEnvironmental specifications Acoustics Measurement type Specification Electromagnetic immunityReliability Radio frequency environmentsSafety certification Agency certificationElectromagnetic compatibility Korean BCCEnvironmental protection FCC verificationEuropean Union Restriction of Hazardous Substances RoHS Corrosive environment China Restriction of Hazardous Substances RoHS DirectiveConfiguring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingSerial ATA Sata interface Hot-Plug compatibilitySerial ATA device plug connector pin definitions Serial ATA connector pin definitionsSignal Pin Function DefinitionSupported ATA commands ATA-standard commands names Command code in hexATA-standard security commands Identify Device command Word Description ValueXx07H Description if bit is set to Bit Set Features command Set Features command values3 S.M.A.R.T. commands A.R.T. commands Code in features register A.R.T. commandMomentus XT Product Manual, Rev. D Index ITE TPI Momentus XT Product Manual, Rev. D Page Seagate Technology LLC Americas