Seagate ST43402ND, ST43401N/ND user manual Environmental requirements Conditions Specifications

Page 18

8

ST43401N/ND, ST43402ND User’s Manual, Rev. B

Table 2. Environmental requirements

Conditions

Specifications

Operating environment

 

Temperature

Range of 5°C to 50°C (41°F to 122°F) with a

 

maximum change of 20°C (36°F) per hour

Humidity

Range of 5% to 95% relative

 

A maximum wet bulb temperature of 26°C (79°F)

Barometric pressure

305 m to 3,048 m (1,000 ft to 10,000 ft)

 

104 kPa to 69 kPa (30 in Hg to 20 in Hg)

Non-operating environment (unpacked)

TemperatureRange of 40°C to 60°C ( 40°F to 140°F) with a maximum change of 20°C (36°F) per hour

Humidity

Range of 5% to 95% relative

 

A maximum wet bulb temperature of 26°C (79°F)

Barometric pressure

305 m to 12,192 m (1,000 ft to 40,000 ft)

 

104 kPa to 19 kPa (30 in Hg to 6 in Hg)

Transit and storage environment (packed)

TemperatureRange of 40°C to 60°C ( 40°F to 140°F) with a maximum change of 20°C (36°F) per hour

Humidity

Range of 5% to 95% relative

Barometric pressure 305 m to 12,192 m (1,000 ft to 40,000 ft) 104 kPa to 19 kPa (30 in Hg to 6 in Hg)

Image 18
Contents Elite Disc Drive ST43401N/ND ST43402ND Contents Preface Electrostatic discharge protectionImportant safety information and precautions Page Wichtige Sicherheitshinweise Page Page SeaFONE 408 Technical support servicesSeaFAX USA 408 438-2620 England SeaTDD 408Telephone Location NumberGeneral description ST43402ND disc drive ST43401N/ND, ST43402ND User’s Manual, Rev. B Characteristics Conditions Specifications Write Read MsecPage Drive functional block diagram Site requirements Environmental requirementsUmgebungsbedingungen Environmental requirements Conditions Specifications ST43401N/ND, ST43402ND User’s Manual, Rev. B Air-flow requirements Suggested air flow/Empfohlener Luftstromverlauf Space requirements Räumliche AnforderungenMounting orientations Montageorientierungen Dimensions of the drive Laufwerkabmessungen Power requirements ST43401N/ND, ST43402ND User’s Manual, Rev. B Grounding requirements Interface requirementsST43401N/ND, ST43402ND User’s Manual, Rev. B Ground Ground Diffsens Termpwr Reserved ATN BSY ACK RST MSG SEL REQ Even pin Odd pin Signal name Numbers Inspection Unpacking, inspection, and repackingUnpacking RepackingInstallation procedures Setting the control board jumpersJ4B J4A ST43402ND I/O board J09 jumpers ST43402ND I/O board J10 jumpers ST43402ND I/O board J01 and J03 jumpers Installing a power supply Setting the voltage rangeMounting the power supply Attaching an optional bezel Attaching a bezel ST43401N/ND shownMounting the drive Mounting the drive ST43401N/ND shown Connecting the system I/O cabling ST43401N/ND drivesST43402ND drives ST43402ND I/O cable attachmentST43401N terminator attachment-single-ended I/O ST43401ND terminator attachment-differential I/O Grounding the system Synchronizing the spindleJ4A J4A ST43401N/ND, ST43402ND User’s Manual, Rev. B Verification Page LED indicators OperationLEDs on ST43401N/ND drives LED indicator Function LEDs on ST43402ND drives When it is off, the drive does not have a Scsi LED or indicator Function Operating instructionsParts data Options and accessories Part Number Description Maintenance Observing maintenance precautionsArranging for depot repair Removing and replacing a drivePacking a drive for shipment