Seagate ST43402ND, ST43401N/ND user manual Options and accessories Part Number Description

50 ST43401N/ND, ST43402ND User’s Manual, Rev. B

Table 8. Options and accessories

Part

number Description

12263496 Static ground wrist strap, 6 1/2 to 8-inch wrist

**I/O cables (unshielded)

**External terminators

96752447 Terminator resistor-pak, single-ended

70906701 Terminator resistor-pak, differential

70935801 Terminator adapter cable assembly, differential 75168323 AC power cord set, 100–120V, 60 Hz, 5-15P 75168334 AC power cord set, 208–240V, 60 Hz, 6-15P 75168324 AC power cord set, 208–240V, 50 Hz

89500420 DC power cable, 24 inches (609.6 mm) long (power supply to drive)

89500422 DC power cable, 6 inches (15.2 cm) long (power supply to drive) 70553701 Bezel, black (with red LED, cable, and double-sticky tape) 70553702 Bezel, black (with green LED, cable, and double-sticky tape) 70703929 Spindle sync cable*, 1.5 feet (0.46 meter) long

70703921 Spindle sync cable*, 3 feet (0.92 meter) long

70703922 Spindle sync cable*, 5 feet (1.52 meter) long

70703923 Spindle sync cable*, 7 feet (2.12 meter) long

70703924 Spindle sync cable*, 10 feet (3.05 meter) long

70703925 Spindle sync cable*, 20 feet (6.10 meter) long

70703926 Spindle sync cable*, 30 feet (9.14 meter) long

70703927 Spindle sync cable*, 40 feet (12.20 meter) long

70703928 Spindle sync cable*, 50 feet (15.24 meter) long

70574221 Spindle sync terminator

97630051 Shunt, two-pin (2 mm)

(used to select options on circuit board jumpers)

70935801 Adapter cable assembly

*A custom cable may be needed for spindle sync connection between a drive and an external source.

**See the reference manual (publication 83327730) for part numbers of terminators, complete I/O cables, and connectors and cabling needed to create custom I/O cables.