Westinghouse LCM-20v5 user manual OSD Menu Functions, That have been made

OSD Menu Functions

All the function settings for the LCD monitor are controlled via the control keys located on the side of the monitor. To display the OSD main menu, press the “Menu” keypad button on the control panel. (Note: The OSD menu display will disappear automatically after approximately 10 seconds, if no action is taken.)

The LCD monitor has been adjusted to optimal settings before shipment. Adjustments to the monitor settings can be made using the OSD menu.

• Press the “Menu” button to display the OSD.

• Press the Turbo/▲ or Auto/▼ button to scroll through the sub-menus (Image, Audio, Color, Miscellaneous, and Information Sub-Menus).

•	Press the	/X button to enter the sub-menu.
•	Press the Turbo/▲ or Auto/▼ button to select the function to be adjusted.
•	Press the		/W or	/X buttons to change the current setting of the sub-function.
•	To go back to the previous menu, press the					button. Changes are saved
	automatically.
•	To exit the OSD menu press "Menu"				again. It automatically will save any changes

ENGLISH

that have been made.

Image Menu

Color Temp. Menu

Miscellaneous Menu

Information Menu

Source

Resolution & Frequency

NOTES:

•Any changes are automatically saved in memory when the OSD turns off. Turning off the power should be avoided while using the OSD menu.

•Adjustments for clock, phase, and positions are saved for each individual signal timing. Except for these adjustments, all other adjustments have only one setting, which applies to all signal timings.

•The icon color will change from gray to blue when a sub-menu is selected.

11